========== User Guide ========== .. Hello there! If you're thinking of adding content to this page... please take a moment to consider if this content can live on its own, within a topic guide or a reference page. There is active effort being put toward *reducing* the amount of content on this specific page (https://github.com/pypa/pip/issues/9475) and moving it into more focused single-page documents that cover that specific topic. Running pip =========== pip is a command line program. When you install pip, a ``pip`` command is added to your system, which can be run from the command prompt as follows: .. tab:: Unix/macOS .. code-block:: shell python -m pip ``python -m pip`` executes pip using the Python interpreter you specified as python. So ``/usr/bin/python3.7 -m pip`` means you are executing pip for your interpreter located at ``/usr/bin/python3.7``. .. tab:: Windows .. code-block:: shell py -m pip ``py -m pip`` executes pip using the latest Python interpreter you have installed. For more details, read the `Python Windows launcher`_ docs. Installing Packages =================== pip supports installing from `PyPI`_, version control, local projects, and directly from distribution files. The most common scenario is to install from `PyPI`_ using :ref:`Requirement Specifiers` .. tab:: Unix/macOS .. code-block:: shell python -m pip install SomePackage # latest version python -m pip install SomePackage==1.0.4 # specific version python -m pip install 'SomePackage>=1.0.4' # minimum version .. tab:: Windows .. code-block:: shell py -m pip install SomePackage # latest version py -m pip install SomePackage==1.0.4 # specific version py -m pip install 'SomePackage>=1.0.4' # minimum version For more information and examples, see the :ref:`pip install` reference. .. _PyPI: https://pypi.org/ .. _`0-basic-authentication-credentials`: .. rubric:: Basic Authentication Credentials This is now covered in :doc:`topics/authentication`. .. _`0-netrc-support`: .. rubric:: netrc Support This is now covered in :doc:`topics/authentication`. .. _`0-keyring-support`: .. rubric:: Keyring Support This is now covered in :doc:`topics/authentication`. Using a Proxy Server ==================== When installing packages from `PyPI`_, pip requires internet access, which in many corporate environments requires an outbound HTTP proxy server. pip can be configured to connect through a proxy server in various ways: * using the ``--proxy`` command-line option to specify a proxy in the form ``scheme://[user:passwd@]proxy.server:port`` * using ``proxy`` in a :ref:`config-file` * by setting the standard environment-variables ``http_proxy``, ``https_proxy`` and ``no_proxy``. * using the environment variable ``PIP_USER_AGENT_USER_DATA`` to include a JSON-encoded string in the user-agent variable used in pip's requests. .. _`Requirements Files`: Requirements Files ================== "Requirements files" are files containing a list of items to be installed using :ref:`pip install` like so: .. tab:: Unix/macOS .. code-block:: shell python -m pip install -r requirements.txt .. tab:: Windows .. code-block:: shell py -m pip install -r requirements.txt Details on the format of the files are here: :ref:`requirements-file-format`. Logically, a Requirements file is just a list of :ref:`pip install` arguments placed in a file. Note that you should not rely on the items in the file being installed by pip in any particular order. Requirements files can also be served via a URL, e.g. http://example.com/requirements.txt besides as local files, so that they can be stored and served in a centralized place. In practice, there are 4 common uses of Requirements files: 1. Requirements files are used to hold the result from :ref:`pip freeze` for the purpose of achieving :doc:`topics/repeatable-installs`. In this case, your requirement file contains a pinned version of everything that was installed when ``pip freeze`` was run. .. tab:: Unix/macOS .. code-block:: shell python -m pip freeze > requirements.txt python -m pip install -r requirements.txt .. tab:: Windows .. code-block:: shell py -m pip freeze > requirements.txt py -m pip install -r requirements.txt 2. Requirements files are used to force pip to properly resolve dependencies. pip 20.2 and earlier `doesn't have true dependency resolution `_, but instead simply uses the first specification it finds for a project. E.g. if ``pkg1`` requires ``pkg3>=1.0`` and ``pkg2`` requires ``pkg3>=1.0,<=2.0``, and if ``pkg1`` is resolved first, pip will only use ``pkg3>=1.0``, and could easily end up installing a version of ``pkg3`` that conflicts with the needs of ``pkg2``. To solve this problem, you can place ``pkg3>=1.0,<=2.0`` (i.e. the correct specification) into your requirements file directly along with the other top level requirements. Like so:: pkg1 pkg2 pkg3>=1.0,<=2.0 3. Requirements files are used to force pip to install an alternate version of a sub-dependency. For example, suppose ``ProjectA`` in your requirements file requires ``ProjectB``, but the latest version (v1.3) has a bug, you can force pip to accept earlier versions like so:: ProjectA ProjectB<1.3 4. Requirements files are used to override a dependency with a local patch that lives in version control. For example, suppose a dependency ``SomeDependency`` from PyPI has a bug, and you can't wait for an upstream fix. You could clone/copy the src, make the fix, and place it in VCS with the tag ``sometag``. You'd reference it in your requirements file with a line like so:: git+https://myvcs.com/some_dependency@sometag#egg=SomeDependency If ``SomeDependency`` was previously a top-level requirement in your requirements file, then **replace** that line with the new line. If ``SomeDependency`` is a sub-dependency, then **add** the new line. It's important to be clear that pip determines package dependencies using `install_requires metadata `_, not by discovering ``requirements.txt`` files embedded in projects. See also: * :ref:`requirements-file-format` * :ref:`pip freeze` * `"setup.py vs requirements.txt" (an article by Donald Stufft) `_ .. _`Constraints Files`: Constraints Files ================= Constraints files are requirements files that only control which version of a requirement is installed, not whether it is installed or not. Their syntax and contents is a subset of :ref:`Requirements Files`, with several kinds of syntax not allowed: constraints must have a name, they cannot be editable, and they cannot specify extras. In terms of semantics, there is one key difference: Including a package in a constraints file does not trigger installation of the package. Use a constraints file like so: .. tab:: Unix/macOS .. code-block:: shell python -m pip install -c constraints.txt .. tab:: Windows .. code-block:: shell py -m pip install -c constraints.txt Constraints files are used for exactly the same reason as requirements files when you don't know exactly what things you want to install. For instance, say that the "helloworld" package doesn't work in your environment, so you have a local patched version. Some things you install depend on "helloworld", and some don't. One way to ensure that the patched version is used consistently is to manually audit the dependencies of everything you install, and if "helloworld" is present, write a requirements file to use when installing that thing. Constraints files offer a better way: write a single constraints file for your organisation and use that everywhere. If the thing being installed requires "helloworld" to be installed, your fixed version specified in your constraints file will be used. Constraints file support was added in pip 7.1. In :ref:`Resolver changes 2020` we did a fairly comprehensive overhaul, removing several undocumented and unsupported quirks from the previous implementation, and stripped constraints files down to being purely a way to specify global (version) limits for packages. Same as requirements files, constraints files can also be served via a URL, e.g. http://example.com/constraints.txt, so that your organization can store and serve them in a centralized place. .. _`Installing from Wheels`: Installing from Wheels ====================== "Wheel" is a built, archive format that can greatly speed installation compared to building and installing from source archives. For more information, see the `Wheel docs `_ , :pep:`427`, and :pep:`425`. pip prefers Wheels where they are available. To disable this, use the :ref:`--no-binary ` flag for :ref:`pip install`. If no satisfactory wheels are found, pip will default to finding source archives. To install directly from a wheel archive: .. tab:: Unix/macOS .. code-block:: shell python -m pip install SomePackage-1.0-py2.py3-none-any.whl .. tab:: Windows .. code-block:: shell py -m pip install SomePackage-1.0-py2.py3-none-any.whl To include optional dependencies provided in the ``provides_extras`` metadata in the wheel, you must add quotes around the install target name: .. tab:: Unix/macOS .. code-block:: shell python -m pip install './somepackage-1.0-py2.py3-none-any.whl[my-extras]' .. tab:: Windows .. code-block:: shell py -m pip install './somepackage-1.0-py2.py3-none-any.whl[my-extras]' .. note:: In the future, the ``path[extras]`` syntax may become deprecated. It is recommended to use PEP 508 syntax wherever possible. For the cases where wheels are not available, pip offers :ref:`pip wheel` as a convenience, to build wheels for all your requirements and dependencies. :ref:`pip wheel` requires the `wheel package `_ to be installed, which provides the "bdist_wheel" setuptools extension that it uses. To build wheels for your requirements and all their dependencies to a local directory: .. tab:: Unix/macOS .. code-block:: shell python -m pip install wheel python -m pip wheel --wheel-dir=/local/wheels -r requirements.txt .. tab:: Windows .. code-block:: shell py -m pip install wheel py -m pip wheel --wheel-dir=/local/wheels -r requirements.txt And *then* to install those requirements just using your local directory of wheels (and not from PyPI): .. tab:: Unix/macOS .. code-block:: shell python -m pip install --no-index --find-links=/local/wheels -r requirements.txt .. tab:: Windows .. code-block:: shell py -m pip install --no-index --find-links=/local/wheels -r requirements.txt Uninstalling Packages ===================== pip is able to uninstall most packages like so: .. tab:: Unix/macOS .. code-block:: shell python -m pip uninstall SomePackage .. tab:: Windows .. code-block:: shell py -m pip uninstall SomePackage pip also performs an automatic uninstall of an old version of a package before upgrading to a newer version. For more information and examples, see the :ref:`pip uninstall` reference. Listing Packages ================ To list installed packages: .. tab:: Unix/macOS .. code-block:: console $ python -m pip list docutils (0.9.1) Jinja2 (2.6) Pygments (1.5) Sphinx (1.1.2) .. tab:: Windows .. code-block:: console C:\> py -m pip list docutils (0.9.1) Jinja2 (2.6) Pygments (1.5) Sphinx (1.1.2) To list outdated packages, and show the latest version available: .. tab:: Unix/macOS .. code-block:: console $ python -m pip list --outdated docutils (Current: 0.9.1 Latest: 0.10) Sphinx (Current: 1.1.2 Latest: 1.1.3) .. tab:: Windows .. code-block:: console C:\> py -m pip list --outdated docutils (Current: 0.9.1 Latest: 0.10) Sphinx (Current: 1.1.2 Latest: 1.1.3) To show details about an installed package: .. tab:: Unix/macOS .. code-block:: console $ python -m pip show sphinx --- Name: Sphinx Version: 1.1.3 Location: /my/env/lib/pythonx.x/site-packages Requires: Pygments, Jinja2, docutils .. tab:: Windows .. code-block:: console C:\> py -m pip show sphinx --- Name: Sphinx Version: 1.1.3 Location: /my/env/lib/pythonx.x/site-packages Requires: Pygments, Jinja2, docutils For more information and examples, see the :ref:`pip list` and :ref:`pip show` reference pages. Searching for Packages ====================== pip can search `PyPI`_ for packages using the ``pip search`` command: .. tab:: Unix/macOS .. code-block:: shell python -m pip search "query" .. tab:: Windows .. code-block:: shell py -m pip search "query" The query will be used to search the names and summaries of all packages. For more information and examples, see the :ref:`pip search` reference. .. _`0-configuration`: .. rubric:: Configuration This is now covered in :doc:`topics/configuration`. .. _`0-config-file`: .. rubric:: Config file This is now covered in :doc:`topics/configuration`. .. _`0-environment-variables`: .. rubric:: Environment Variables This is now covered in :doc:`topics/configuration`. .. _`0-config-precedence`: .. rubric:: Config Precedence This is now covered in :doc:`topics/configuration`. Command Completion ================== pip comes with support for command line completion in bash, zsh and fish. To setup for bash:: python -m pip completion --bash >> ~/.profile To setup for zsh:: python -m pip completion --zsh >> ~/.zprofile To setup for fish:: python -m pip completion --fish > ~/.config/fish/completions/pip.fish To setup for powershell:: python -m pip completion --powershell | Out-File -Encoding default -Append $PROFILE Alternatively, you can use the result of the ``completion`` command directly with the eval function of your shell, e.g. by adding the following to your startup file:: eval "`pip completion --bash`" .. _`Installing from local packages`: Installing from local packages ============================== In some cases, you may want to install from local packages only, with no traffic to PyPI. First, download the archives that fulfill your requirements: .. tab:: Unix/macOS .. code-block:: shell python -m pip download --destination-directory DIR -r requirements.txt .. tab:: Windows .. code-block:: shell py -m pip download --destination-directory DIR -r requirements.txt Note that ``pip download`` will look in your wheel cache first, before trying to download from PyPI. If you've never installed your requirements before, you won't have a wheel cache for those items. In that case, if some of your requirements don't come as wheels from PyPI, and you want wheels, then run this instead: .. tab:: Unix/macOS .. code-block:: shell python -m pip wheel --wheel-dir DIR -r requirements.txt .. tab:: Windows .. code-block:: shell py -m pip wheel --wheel-dir DIR -r requirements.txt Then, to install from local only, you'll be using :ref:`--find-links ` and :ref:`--no-index ` like so: .. tab:: Unix/macOS .. code-block:: shell python -m pip install --no-index --find-links=DIR -r requirements.txt .. tab:: Windows .. code-block:: shell py -m pip install --no-index --find-links=DIR -r requirements.txt "Only if needed" Recursive Upgrade ================================== ``pip install --upgrade`` now has a ``--upgrade-strategy`` option which controls how pip handles upgrading of dependencies. There are 2 upgrade strategies supported: - ``eager``: upgrades all dependencies regardless of whether they still satisfy the new parent requirements - ``only-if-needed``: upgrades a dependency only if it does not satisfy the new parent requirements The default strategy is ``only-if-needed``. This was changed in pip 10.0 due to the breaking nature of ``eager`` when upgrading conflicting dependencies. It is important to note that ``--upgrade`` affects *direct requirements* (e.g. those specified on the command-line or via a requirements file) while ``--upgrade-strategy`` affects *indirect requirements* (dependencies of direct requirements). As an example, say ``SomePackage`` has a dependency, ``SomeDependency``, and both of them are already installed but are not the latest available versions: - ``pip install SomePackage``: will not upgrade the existing ``SomePackage`` or ``SomeDependency``. - ``pip install --upgrade SomePackage``: will upgrade ``SomePackage``, but not ``SomeDependency`` (unless a minimum requirement is not met). - ``pip install --upgrade SomePackage --upgrade-strategy=eager``: upgrades both ``SomePackage`` and ``SomeDependency``. As an historic note, an earlier "fix" for getting the ``only-if-needed`` behaviour was: .. tab:: Unix/macOS .. code-block:: shell python -m pip install --upgrade --no-deps SomePackage python -m pip install SomePackage .. tab:: Windows .. code-block:: shell py -m pip install --upgrade --no-deps SomePackage py -m pip install SomePackage A proposal for an ``upgrade-all`` command is being considered as a safer alternative to the behaviour of eager upgrading. User Installs ============= With Python 2.6 came the `"user scheme" for installation `_, which means that all Python distributions support an alternative install location that is specific to a user. The default location for each OS is explained in the python documentation for the `site.USER_BASE `_ variable. This mode of installation can be turned on by specifying the :ref:`--user ` option to ``pip install``. Moreover, the "user scheme" can be customized by setting the ``PYTHONUSERBASE`` environment variable, which updates the value of ``site.USER_BASE``. To install "SomePackage" into an environment with ``site.USER_BASE`` customized to '/myappenv', do the following: .. tab:: Unix/macOS .. code-block:: shell export PYTHONUSERBASE=/myappenv python -m pip install --user SomePackage .. tab:: Windows .. code-block:: shell set PYTHONUSERBASE=c:/myappenv py -m pip install --user SomePackage ``pip install --user`` follows four rules: #. When globally installed packages are on the python path, and they *conflict* with the installation requirements, they are ignored, and *not* uninstalled. #. When globally installed packages are on the python path, and they *satisfy* the installation requirements, pip does nothing, and reports that requirement is satisfied (similar to how global packages can satisfy requirements when installing packages in a ``--system-site-packages`` virtualenv). #. pip will not perform a ``--user`` install in a ``--no-site-packages`` virtualenv (i.e. the default kind of virtualenv), due to the user site not being on the python path. The installation would be pointless. #. In a ``--system-site-packages`` virtualenv, pip will not install a package that conflicts with a package in the virtualenv site-packages. The --user installation would lack sys.path precedence and be pointless. To make the rules clearer, here are some examples: From within a ``--no-site-packages`` virtualenv (i.e. the default kind): .. tab:: Unix/macOS .. code-block:: console $ python -m pip install --user SomePackage Can not perform a '--user' install. User site-packages are not visible in this virtualenv. .. tab:: Windows .. code-block:: console C:\> py -m pip install --user SomePackage Can not perform a '--user' install. User site-packages are not visible in this virtualenv. From within a ``--system-site-packages`` virtualenv where ``SomePackage==0.3`` is already installed in the virtualenv: .. tab:: Unix/macOS .. code-block:: console $ python -m pip install --user SomePackage==0.4 Will not install to the user site because it will lack sys.path precedence .. tab:: Windows .. code-block:: console C:\> py -m pip install --user SomePackage==0.4 Will not install to the user site because it will lack sys.path precedence From within a real python, where ``SomePackage`` is *not* installed globally: .. tab:: Unix/macOS .. code-block:: console $ python -m pip install --user SomePackage [...] Successfully installed SomePackage .. tab:: Windows .. code-block:: console C:\> py -m pip install --user SomePackage [...] Successfully installed SomePackage From within a real python, where ``SomePackage`` *is* installed globally, but is *not* the latest version: .. tab:: Unix/macOS .. code-block:: console $ python -m pip install --user SomePackage [...] Requirement already satisfied (use --upgrade to upgrade) $ python -m pip install --user --upgrade SomePackage [...] Successfully installed SomePackage .. tab:: Windows .. code-block:: console C:\> py -m pip install --user SomePackage [...] Requirement already satisfied (use --upgrade to upgrade) C:\> py -m pip install --user --upgrade SomePackage [...] Successfully installed SomePackage From within a real python, where ``SomePackage`` *is* installed globally, and is the latest version: .. tab:: Unix/macOS .. code-block:: console $ python -m pip install --user SomePackage [...] Requirement already satisfied (use --upgrade to upgrade) $ python -m pip install --user --upgrade SomePackage [...] Requirement already up-to-date: SomePackage # force the install $ python -m pip install --user --ignore-installed SomePackage [...] Successfully installed SomePackage .. tab:: Windows .. code-block:: console C:\> py -m pip install --user SomePackage [...] Requirement already satisfied (use --upgrade to upgrade) C:\> py -m pip install --user --upgrade SomePackage [...] Requirement already up-to-date: SomePackage # force the install C:\> py -m pip install --user --ignore-installed SomePackage [...] Successfully installed SomePackage .. _`0-repeatability`: .. _`0-ensuring-repeatability`: .. rubric:: Ensuring Repeatability This is now covered in :doc:`../topics/repeatable-installs`. .. _`0-fixing-conflicting-dependencies`: .. rubric:: Fixing conflicting dependencies This is now covered in :doc:`../topics/dependency-resolution`. .. _`Using pip from your program`: Using pip from your program =========================== As noted previously, pip is a command line program. While it is implemented in Python, and so is available from your Python code via ``import pip``, you must not use pip's internal APIs in this way. There are a number of reasons for this: #. The pip code assumes that it is in sole control of the global state of the program. pip manages things like the logging system configuration, or the values of the standard IO streams, without considering the possibility that user code might be affected. #. pip's code is *not* thread safe. If you were to run pip in a thread, there is no guarantee that either your code or pip's would work as you expect. #. pip assumes that once it has finished its work, the process will terminate. It doesn't need to handle the possibility that other code will continue to run after that point, so (for example) calling pip twice in the same process is likely to have issues. This does not mean that the pip developers are opposed in principle to the idea that pip could be used as a library - it's just that this isn't how it was written, and it would be a lot of work to redesign the internals for use as a library, handling all of the above issues, and designing a usable, robust and stable API that we could guarantee would remain available across multiple releases of pip. And we simply don't currently have the resources to even consider such a task. What this means in practice is that everything inside of pip is considered an implementation detail. Even the fact that the import name is ``pip`` is subject to change without notice. While we do try not to break things as much as possible, all the internal APIs can change at any time, for any reason. It also means that we generally *won't* fix issues that are a result of using pip in an unsupported way. It should also be noted that installing packages into ``sys.path`` in a running Python process is something that should only be done with care. The import system caches certain data, and installing new packages while a program is running may not always behave as expected. In practice, there is rarely an issue, but it is something to be aware of. Having said all of the above, it is worth covering the options available if you decide that you do want to run pip from within your program. The most reliable approach, and the one that is fully supported, is to run pip in a subprocess. This is easily done using the standard ``subprocess`` module:: subprocess.check_call([sys.executable, '-m', 'pip', 'install', 'my_package']) If you want to process the output further, use one of the other APIs in the module. We are using `freeze`_ here which outputs installed packages in requirements format.:: reqs = subprocess.check_output([sys.executable, '-m', 'pip', 'freeze']) If you don't want to use pip's command line functionality, but are rather trying to implement code that works with Python packages, their metadata, or PyPI, then you should consider other, supported, packages that offer this type of ability. Some examples that you could consider include: * ``packaging`` - Utilities to work with standard package metadata (versions, requirements, etc.) * ``setuptools`` (specifically ``pkg_resources``) - Functions for querying what packages the user has installed on their system. * ``distlib`` - Packaging and distribution utilities (including functions for interacting with PyPI). .. _changes-to-the-pip-dependency-resolver-in-20-2-2020: .. _`Resolver changes 2020`: Changes to the pip dependency resolver in 20.3 (2020) ===================================================== pip 20.3 has a new dependency resolver, on by default for Python 3 users. (pip 20.1 and 20.2 included pre-release versions of the new dependency resolver, hidden behind optional user flags.) Read below for a migration guide, how to invoke the legacy resolver, and the deprecation timeline. We also made a `two-minute video explanation`_ you can watch. We will continue to improve the pip dependency resolver in response to testers' feedback. Please give us feedback through the `resolver testing survey`_. .. _`Migration guide for 2020 resolver changes`: Watch out for ------------- The big change in this release is to the pip dependency resolver within pip. Computers need to know the right order to install pieces of software ("to install ``x``, you need to install ``y`` first"). So, when Python programmers share software as packages, they have to precisely describe those installation prerequisites, and pip needs to navigate tricky situations where it's getting conflicting instructions. This new dependency resolver will make pip better at handling that tricky logic, and make pip easier for you to use and troubleshoot. The most significant changes to the resolver are: * It will **reduce inconsistency**: it will *no longer install a combination of packages that is mutually inconsistent*. In older versions of pip, it is possible for pip to install a package which does not satisfy the declared requirements of another installed package. For example, in pip 20.0, ``pip install "six<1.12" "virtualenv==20.0.2"`` does the wrong thing, “successfully” installing ``six==1.11``, even though ``virtualenv==20.0.2`` requires ``six>=1.12.0,<2`` (`defined here `__). The new resolver, instead, outright rejects installing anything if it gets that input. * It will be **stricter** - if you ask pip to install two packages with incompatible requirements, it will refuse (rather than installing a broken combination, like it did in previous versions). So, if you have been using workarounds to force pip to deal with incompatible or inconsistent requirements combinations, now's a good time to fix the underlying problem in the packages, because pip will be stricter from here on out. This also means that, when you run a ``pip install`` command, pip only considers the packages you are installing in that command, and **may break already-installed packages**. It will not guarantee that your environment will be consistent all the time. If you ``pip install x`` and then ``pip install y``, it's possible that the version of ``y`` you get will be different than it would be if you had run ``pip install x y`` in a single command. We are considering changing this behavior (per :issue:`7744`) and would like your thoughts on what pip's behavior should be; please answer `our survey on upgrades that create conflicts`_. We are also changing our support for :ref:`Constraints Files`, editable installs, and related functionality. We did a fairly comprehensive overhaul and stripped constraints files down to being purely a way to specify global (version) limits for packages, and so some combinations that used to be allowed will now cause errors. Specifically: * Constraints don't override the existing requirements; they simply constrain what versions are visible as input to the resolver (see :issue:`9020`) * Providing an editable requirement (``-e .``) does not cause pip to ignore version specifiers or constraints (see :issue:`8076`), and if you have a conflict between a pinned requirement and a local directory then pip will indicate that it cannot find a version satisfying both (see :issue:`8307`) * Hash-checking mode requires that all requirements are specified as a ``==`` match on a version and may not work well in combination with constraints (see :issue:`9020` and :issue:`8792`) * If necessary to satisfy constraints, pip will happily reinstall packages, upgrading or downgrading, without needing any additional command-line options (see :issue:`8115` and :doc:`development/architecture/upgrade-options`) * Unnamed requirements are not allowed as constraints (see :issue:`6628` and :issue:`8210`) * Links are not allowed as constraints (see :issue:`8253`) * Constraints cannot have extras (see :issue:`6628`) Per our :ref:`Python 2 Support` policy, pip 20.3 users who are using Python 2 will use the legacy resolver by default. Python 2 users should upgrade to Python 3 as soon as possible, since in pip 21.0 in January 2021, pip dropped support for Python 2 altogether. How to upgrade and migrate -------------------------- 1. **Install pip 20.3** with ``python -m pip install --upgrade pip``. 2. **Validate your current environment** by running ``pip check``. This will report if you have any inconsistencies in your set of installed packages. Having a clean installation will make it much less likely that you will hit issues with the new resolver (and may address hidden problems in your current environment!). If you run ``pip check`` and run into stuff you can’t figure out, please `ask for help in our issue tracker or chat `__. 3. **Test the new version of pip**. While we have tried to make sure that pip’s test suite covers as many cases as we can, we are very aware that there are people using pip with many different workflows and build processes, and we will not be able to cover all of those without your help. - If you use pip to install your software, try out the new resolver and let us know if it works for you with ``pip install``. Try: - installing several packages simultaneously - re-creating an environment using a ``requirements.txt`` file - using ``pip install --force-reinstall`` to check whether it does what you think it should - using constraints files - the "Setups to test with special attention" and "Examples to try" below - If you have a build pipeline that depends on pip installing your dependencies for you, check that the new resolver does what you need. - Run your project’s CI (test suite, build process, etc.) using the new resolver, and let us know of any issues. - If you have encountered resolver issues with pip in the past, check whether the new resolver fixes them, and read :ref:`Fixing conflicting dependencies`. Also, let us know if the new resolver has issues with any workarounds you put in to address the current resolver’s limitations. We’ll need to ensure that people can transition off such workarounds smoothly. - If you develop or support a tool that wraps pip or uses it to deliver part of your functionality, please test your integration with pip 20.3. 4. **Troubleshoot and try these workarounds if necessary.** - If pip is taking longer to install packages, read :doc:`Dependency resolution backtracking ` for ways to reduce the time pip spends backtracking due to dependency conflicts. - If you don't want pip to actually resolve dependencies, use the ``--no-deps`` option. This is useful when you have a set of package versions that work together in reality, even though their metadata says that they conflict. For guidance on a long-term fix, read :ref:`Fixing conflicting dependencies`. - If you run into resolution errors and need a workaround while you're fixing their root causes, you can choose the old resolver behavior using the flag ``--use-deprecated=legacy-resolver``. This will work until we release pip 21.0 (see :ref:`Deprecation timeline for 2020 resolver changes`). 5. **Please report bugs** through the `resolver testing survey`_. Setups to test with special attention ------------------------------------- * Requirements files with 100+ packages * Installation workflows that involve multiple requirements files * Requirements files that include hashes (:ref:`hash-checking mode`) or pinned dependencies (perhaps as output from ``pip-compile`` within ``pip-tools``) * Using :ref:`Constraints Files` * Continuous integration/continuous deployment setups * Installing from any kind of version control systems (i.e., Git, Subversion, Mercurial, or CVS), per :doc:`topics/vcs-support` * Installing from source code held in local directories Examples to try ^^^^^^^^^^^^^^^ Install: * `tensorflow`_ * ``hacking`` * ``pycodestyle`` * ``pandas`` * ``tablib`` * ``elasticsearch`` and ``requests`` together * ``six`` and ``cherrypy`` together * ``pip install flake8-import-order==0.17.1 flake8==3.5.0 --use-feature=2020-resolver`` * ``pip install tornado==5.0 sprockets.http==1.5.0 --use-feature=2020-resolver`` Try: * ``pip install`` * ``pip uninstall`` * ``pip check`` * ``pip cache`` Tell us about ------------- Specific things we'd love to get feedback on: * Cases where the new resolver produces the wrong result, obviously. We hope there won't be too many of these, but we'd like to trap such bugs before we remove the legacy resolver. * Cases where the resolver produced an error when you believe it should have been able to work out what to do. * Cases where the resolver gives an error because there's a problem with your requirements, but you need better information to work out what's wrong. * If you have workarounds to address issues with the current resolver, does the new resolver let you remove those workarounds? Tell us! Please let us know through the `resolver testing survey`_. .. _`Deprecation timeline for 2020 resolver changes`: Deprecation timeline -------------------- We plan for the resolver changeover to proceed as follows, using :ref:`Feature Flags` and following our :ref:`Release Cadence`: * pip 20.1: an alpha version of the new resolver was available, opt-in, using the optional flag ``--unstable-feature=resolver``. pip defaulted to legacy behavior. * pip 20.2: a beta of the new resolver was available, opt-in, using the flag ``--use-feature=2020-resolver``. pip defaulted to legacy behavior. Users of pip 20.2 who want pip to default to using the new resolver can run ``pip config set global.use-feature 2020-resolver`` (for more on that and the alternate ``PIP_USE_FEATURE`` environment variable option, see `issue 8661`_). * pip 20.3: pip defaults to the new resolver in Python 3 environments, but a user can opt-out and choose the old resolver behavior, using the flag ``--use-deprecated=legacy-resolver``. In Python 2 environments, pip defaults to the old resolver, and the new one is available using the flag ``--use-feature=2020-resolver``. * pip 21.0: pip uses new resolver by default, and the old resolver is no longer supported. It will be removed after a currently undecided amount of time, as the removal is dependent on pip's volunteer maintainers' availability. Python 2 support is removed per our :ref:`Python 2 Support` policy. Since this work will not change user-visible behavior described in the pip documentation, this change is not covered by the :ref:`Deprecation Policy`. Context and followup -------------------- As discussed in `our announcement on the PSF blog`_, the pip team are in the process of developing a new "dependency resolver" (the part of pip that works out what to install based on your requirements). We're tracking our rollout in :issue:`6536` and you can watch for announcements on the `low-traffic packaging announcements list`_ and `the official Python blog`_. .. _freeze: https://pip.pypa.io/en/latest/reference/pip_freeze/ .. _resolver testing survey: https://tools.simplysecure.org/survey/index.php?r=survey/index&sid=989272&lang=en .. _issue 8661: https://github.com/pypa/pip/issues/8661 .. _our announcement on the PSF blog: http://pyfound.blogspot.com/2020/03/new-pip-resolver-to-roll-out-this-year.html .. _two-minute video explanation: https://www.youtube.com/watch?v=B4GQCBBsuNU .. _tensorflow: https://pypi.org/project/tensorflow/ .. _low-traffic packaging announcements list: https://mail.python.org/mailman3/lists/pypi-announce.python.org/ .. _our survey on upgrades that create conflicts: https://docs.google.com/forms/d/e/1FAIpQLSeBkbhuIlSofXqCyhi3kGkLmtrpPOEBwr6iJA6SzHdxWKfqdA/viewform .. _the official Python blog: https://blog.python.org/ .. _Python Windows launcher: https://docs.python.org/3/using/windows.html#launcher .. _`0-using-system-trust-stores-for-verifying-https`: .. rubric:: Using system trust stores for verifying HTTPS This is now covered in :doc:`topics/https-certificates`.