Porting Guide

ImageMagick Version 7 • High Dynamic Range Imaging • Pixel Channels • Alpha • Grayscale • Masks • MagickCore API • Header Files • Deprecated Features Removed • Command-line Interface • Performance Improvements • Version 7 Change Summary

The design of ImageMagick is an evolutionary process, with the design and implementation efforts serving to influence and guide further progress in the other. With ImageMagick version 7, we improved the design based on lessons learned from the version 6 implementation. ImageMagick was originally designed to display RGB images to an X Windows server. Over time we extended support to RGBA images and then to the CMYK and CMYKA image format. With ImageMagick version 7, we extend support to arbitrary colorspaces with an arbitrary number of pixel channels. In addition, ImageMagick 7 stores pixel channels as floats permitting out of band values (e.g. negative) and reduces rounding error. There are numerous other design enhancements described within.

To support variable pixel channels in the MagickCore API, pixel handling has changed when getting or setting the pixel channels. You can access channels as an array, pixel[i], or use an accessor method such as GetPixelRed() or SetPixelRed(). There are some modest changes to the MagickCore and MagickWand API's. The Magick++ and PerlMagick API's have not changed and matches that of the ImageMagick version 6.

The shell API (command line) of ImageMagick version 7 has undergone a major overhaul, with specific emphasis on the ability to read 'options' not only from the command line, but also from scripts, and file streams. This allows for the use of 'co-processing' programming techniques or performing image handling using 'daemon/server backends', and even multi-machine distributed processing.

With the shell API overhaul other improvements were made, including: better reporting of which option failed, the consolidation and deprecation of options, and more global use of 'image properties' (more commonly known as 'percent escapes' in option arguments.

ImageMagick version 7 is available now as a production release.

Now that ImageMagick version 7 is released, we continue to support version 6 for a minimum of 10 years. Support for version 6 is limited primarily to bug fixes and security patches with few enhancements.

High Dynamic Range Imaging

ImageMagick version 7 enables high dynamic range imaging (HDRI) by default. HDRI accurately represents the wide range of intensity levels found in real scenes ranging from the brightest direct sunlight to the deepest darkest shadows. In addition, image processing results are more accurate. The disadvantage is it requires more memory and may result in slower processing times. If you see differences in the results of your version 6 command-line with version 7, it is likely due to HDRI. You may need to add -clamp to your command-line to constrain pixels to the 0 .. QuantumRange range, or disable HDRI when you build ImageMagick version 7. To disable HDRI (recommended for smart phone builds such as iOS or production sites where performance is a premium), simply add --disable-hdri to the configure script command line when building ImageMagick.

Pixel Channels

A pixel is comprised of one or more color values, or channels (e.g. red pixel channel).

Prior versions of ImageMagick (4-6), support 4 to 5 pixel channels (RGBA or CMYKA). The first 4 channels are accessed with the PixelPacket data structure. The structure includes 4 members of type Quantum (typically 16-bits) of red, green, blue, and opacity. The black channel or colormap indexes are supported by a separate method and structure, IndexPacket. As an example, here is a code snippet from ImageMagick version 6 that negates the color components (but not the alpha component) of the image pixels:

for (y=0; y < (ssize_t) image->rows; y++)
{
  IndexPacket
    *indexes;

  PixelPacket
    *q;

  q=GetCacheViewAuthenticPixels(image_view,0,y,image->columns,1,exception);
  if (q == (PixelPacket *) NULL)
    {
      status=MagickFalse;
      continue;
    }
  indexes=GetCacheViewAuthenticIndexQueue(image_view);
  for (x=0; x < (ssize_t) image->columns; x++)
  {
    if ((channel & RedChannel) != 0)
      q->red=(Quantum) QuantumRange-q->red;
    if ((channel & GreenChannel) != 0)
      q->green=(Quantum) QuantumRange-q->green;
    if ((channel & BlueChannel) != 0)
      q->blue=(Quantum) QuantumRange-q->blue;
    if (((channel & IndexChannel) != 0) &&
        (image->colorspace == CMYKColorspace))
      indexes[x]=(IndexPacket) QuantumRange-indexes[x];
    q++;
  }
  if (SyncCacheViewAuthenticPixels(image_view,exception) == MagickFalse)
    status=MagickFalse;
}

ImageMagick version 7 supports any number of channels from 1 to 64 (and beyond) and simplifies access with a single method that returns an array of pixel channels of type Quantum. Source code that compiles against prior versions of ImageMagick requires refactoring to work with ImageMagick version 7. We illustrate with an example. Let's naively refactor the version 6 code snippet from above so it works with the ImageMagick version 7 API:

for (y=0; y < (ssize_t) image->rows; y++)
{
  Quantum
    *q;

  q=GetCacheViewAuthenticPixels(image_view,0,y,image->columns,1,exception);
  if (q == (Quantum *) NULL)
    {
      status=MagickFalse;
      continue;
    }
  for (x=0; x < (ssize_t) image->columns; x++)
  {
    if ((GetPixelRedTraits(image) & UpdatePixelTrait) != 0)
      SetPixelRed(image,QuantumRange-GetPixelRed(image,q),q);
    if ((GetPixelGreenTraits(image) & UpdatePixelTrait) != 0)
      SetPixelGreen(image,QuantumRange-GetPixelGreen(image,q),q);
    if ((GetPixelBlueTraits(image) & UpdatePixelTrait) != 0)
      SetPixelBlue(image,QuantumRange-GetPixelBlue(image,q),q);
    if ((GetPixelBlackTraits(image) & UpdatePixelTrait) != 0)
      SetPixelBlack(image,QuantumRange-GetPixelBlack(image,q),q);
    if ((GetPixelAlphaTraits(image) & UpdatePixelTrait) != 0)
      SetPixelAlpha(image,QuantumRange-GetPixelAlpha(image,q),q);
    q+=GetPixelChannels(image);
  }
  if (SyncCacheViewAuthenticPixels(image_view,exception) == MagickFalse)
    status=MagickFalse;
}

Let's do that again but take full advantage of the new variable pixel channel support:

for (y=0; y < (ssize_t) image->rows; y++)
{
  Quantum
    *q;

  q=GetCacheViewAuthenticPixels(image_view,0,y,image->columns,1,exception);
  if (q == (Quantum *) NULL)
    {
      status=MagickFalse;
      continue;
    }
  for (x = 0; x < (ssize_t) image->columns; x++)
  {
    ssize_t
      i;

    if (GetPixelWriteMask(image,q) <= (QuantumRange/2))
      {
        q+=GetPixelChannels(image);
        continue;
      }
    for (i=0; i < (ssize_t) GetPixelChannels(image); i++)
    {
      PixelChannel channel = GetPixelChannelChannel(image,i);
      PixelTrait traits = GetPixelChannelTraits(image,channel);
      if ((traits & UpdatePixelTrait) == 0)
        continue;
      q[i]=QuantumRange-q[i];
    }
    q+=GetPixelChannels(image);
  }
  if (SyncCacheViewAuthenticPixels(image_view,exception) == MagickFalse)
    status=MagickFalse;
}

Note, how we use GetPixelChannels() to advance to the next set of pixel channels.

The colormap indexes and black pixel channel (for the CMYK colorspace) are no longer stored in the index channel, previously accessed with GetAuthenticIndexQueue() and GetCacheViewAuthenticIndexQueue(). Instead they are now a first class pixel channel and accessed as a member of the pixel array (e.g. pixel[4]) or with the convenience pixel accessor methods GetPixelIndex(), SetPixelIndex(), GetPixelBlack(), and SetPixelBlack().

As a consequence of using an array structure for variable pixel channels, auto-vectorization compilers have additional opportunities to speed up pixel loops.

The `sync` channel in IMv6 was really a flag instead of a channel. In IMv7, we instead use a flag: -define compose:sync=false.

Pixel Accessors

You can access pixel channel as array elements (e.g. pixel[1]) or use convenience accessors to get or set pixel channels:

GetPixela()                  SetPixela()
GetPixelAlpha()              SetPixelAlpha()
GetPixelb()                  SetPixelb()
GetPixelBlack()              SetPixelBlack()
GetPixelBlue()               SetPixelBlue()
GetPixelCb()                 SetPixelCb()
GetPixelCr()                 SetPixelCr()
GetPixelCyan()               SetPixelCyan()
GetPixelGray()               SetPixelGray()
GetPixelGreen()              SetPixelGreen()
GetPixelIndex()              SetPixelIndex()
GetPixelL()                  SetPixelL()
GetPixelMagenta()            SetPixelMagenta()
GetPixelReadMask()           SetPixelReadMask()
GetPixelWriteMask()          SetPixelWriteMask()
GetPixelMetacontentExtent()  SetPixelMetacontentExtent()
GetPixelOpacity()            SetPixelOpacity()
GetPixelRed()                SetPixelRed()
GetPixelYellow()             SetPixelYellow()
GetPixelY()                  SetPixelY()

You can find these accessors defined in the header file, MagickCore/pixel-accessor.h

Pixel Traits

Each pixel channel includes one or more of these traits:

Undefined: no traits associated with this pixel channel
Copy: do not update this pixel channel, just copy it
Update: update this pixel channel
Blend: blend this pixel channel with the alpha mask if it's enabled

We provide these methods to set and get pixel traits:

GetPixelAlphaTraits()    SetPixelAlphaTraits()
GetPixelBlackTraits()    SetPixelBlackTraits()
GetPixelBlueTraits()     SetPixelBlueTraits()
GetPixelCbTraits()       SetPixelCbTraits()
GetPixelChannelTraits()  SetPixelChannelTraits()
GetPixelCrTraits()       SetPixelCrTraits()
GetPixelGrayTraits()     SetPixelGrayTraits()
GetPixelGreenTraits()    SetPixelGreenTraits()
GetPixelIndexTraits()    SetPixelIndexTraits()
GetPixelMagentaTraits()  SetPixelMagentaTraits()
GetPixelRedTraits()      SetPixelRedTraits()
GetPixelYellowTraits()   SetPixelYellowTraits()
GetPixelYTraits()        SetPixelYTraits()

For convenience you can set the active trait for a set of pixel channels with a channel mask and this method:

SetImageChannelMask()

Previously MagickCore methods had channel analogs, for example, NegateImage() and NegateImageChannels(). The channel analog methods are no longer necessary because the pixel channel traits specify whether to act on a particular pixel channel or whether to blend with the alpha mask. For example, instead of

NegateImageChannel(image,channel);

we use:

channel_mask=SetImageChannelMask(image,channel);
NegateImage(image,exception);
(void) SetImageChannelMask(image,channel_mask);

Pixel User Channels

In version 7, we introduce pixel user channels. Traditionally we utilize 4 channels, red, green, blue, and alpha. For CMYK we also have a black channel. User channels are designed to contain whatever additional channel information that makes sense for your application. Some examples include extra channels in TIFF or PSD images or perhaps you require a channel with infrared information for the pixel. You can associate traits with the user channels so that when they are acted upon by an image processing algorithm (e.g. blur) the pixels are copied, acted upon by the algorithm, or even blended with the alpha channel if that makes sense.

Pixel Metacontent

In version 7, we introduce pixel metacontent. Metacontent is content about content. So rather than being the content itself, it's something that describes or is associated with the content. Here the content is a pixel. The pixel metacontent is for your exclusive use (internally the data is just copied, it is not modified) and is accessed with these MagickCore API methods:

SetImageMetacontentExtent()
GetImageMetacontentExtent()
GetVirtualMetacontent()
GetAuthenticMetacontent()
GetCacheViewAuthenticMetacontent()
GetCacheViewVirtualMetacontent()

Alpha

We support alpha now, previously opacity. With alpha, a value of 0 means that the pixel does not have any coverage information and is transparent; i.e. there was no color contribution from any geometry because the geometry did not overlap this pixel. A value of QuantumRange means that the pixel is opaque because the geometry completely overlapped the pixel. As a consequence, in version 7, the PixelInfo structure member alpha has replaced the previous opacity member. Another consequence is the alpha part of an sRGB value in hexadecimal notation is now reversed (e.g. #0000 is fully transparent).

Colorspace

The Rec601Luma and Rec709Luma colorspaces are no longer supported. Instead, specify the gray colorspace and choose from these intensity options:

Rec601Luma
Rec601Luminance
Rec709Luma
Rec709Luminance

For example,

magick myImage.png -intensity Rec709Luminance -colorspace gray myImage.jpg

Grayscale

Previously, grayscale images were Rec601Luminance and consumed 4 channels: red, green, blue, and alpha. With version 7, grayscale consumes only 1 channel requiring far less resources as a result.

Masks

Version 7 supports masks for most image operators. White pixels in a read mask ignores corresponding pixel in an image whereas white pixels in a write mask protects the corresponding pixel in the image. From the command-line, you can associate a mask with an image with the -read-mask and -write-mask options. This polarity matches the masks in version 6 of ImageMagick for ease of porting your workflow. For convenience, we continue to support the -mask option in version 7 to match the behavior of version 6.

In this example, we compute the distortion of a masked reconstructed image:

compare -metric rmse -read-mask hat_mask.png hat.png wizard.png difference.png

Here we protect certain pixels from change:

magick rose: -write-mask rose_bg_mask.png -modulate 110,100,33.3  +write-mask rose_blue.png

A mask associated with an image persists until it is modified or removed. This may produce unexpected results for complex command-lines. Here we only want to clip when applying the alpha option, not the resize:

convert -density 300 -colorspace srgb image.eps -alpha transparent -clip -alpha opaque +clip -resize 1000x1000 -strip image.png

MagickCore API

Here are a list of changes to the MagickCore API:

Almost all image processing algorithms are now channel aware.
The MagickCore API adds an ExceptionInfo argument to those methods that lacked it in version 6, e.g. NegateImage(image,MagickTrue,exception)
All method channel analogs have been removed (e.g. BlurImageChannel()), they are no longer necessary, use pixel traits instead.
Public and private API calls are now declared with the GCC visibility attribute. The MagickCore and MagickWand dynamic libraries now only export public struct and function declarations.
The InterpolatePixelMethod enum is now PixelInterpolateMethod.
The IntegerPixel storage type is removed (use LongPixel instead) and LongLongPixel is added
Image signatures have changed to account for variable pixel channels.
All color packet structures, PixelPacket, LongPacket, and DoublePacket, are consolidated to a single color structure, PixelInfo.
The ChannelMoments structure member I is now invariant. I conflicts with the complex.h header.
We added a length parameter to FormatMagickSize() to permit variable length buffers.

MagickWand API

Here are a list of changes to the MagickWand API:

Almost all image processing algorithms are now channel aware.
The DrawMatte() method is now called DrawAlpha().
The MagickSetImageBias() and MagickSetImageClipMask() methods are no longer supported.

Magick++ API

Here are a list of changes to the Magick++ API:

Almost all image processing algorithms are now channel aware.

Use this construct, for example, to avoid operating on the alpha channel:

image.negateChannel(Magick::ChannelType(Magick::CompositeChannels ^ Magick::AlphaChannel));

Header Files

Prior versions of ImageMagick (4-6) reference the ImageMagick header files as magick/ and wand/. ImageMagick 7 instead uses MagickCore/ and MagickWand/ respectively. For example,

#include <MagickCore/MagickCore.h>
#include <MagickWand/MagickWand.h>

Deprecated Features Removed

All deprecated features from ImageMagick version 6 are removed in version 7. These include the Magick-config and Wand-config configuration utilities. Instead use:

MagickCore-config
MagickWand-config

The FilterImage() method has been removed. Use ConvolveImage() instead.

In addition, all deprecated MagickCore and MagickWand methods are no longer available in version 7.

The Bessel filter was removed as it is an alias for Jinc. Use -filter Jinc instead.

Shell API or Command-line Interface

As mentioned the primary focus of the changes to the Shell API or Command Line Interface is the abstraction so that not only can options be read from command line arguments, but also from a file (script) or from a file stream (interactive commands, or co-processing).

To do this the CLI parser needed to be re-written, so as to always perform all options, in a strict, do-it-as-you-see it order. Previously in IMv6 options were performed in groups (known as 'FireOptions), this awkwardness is now gone. However the strict order means that you can no longer give operations before providing an image for the operations to work on. To do so will now produce an error.

Error reporting is now reporting exactly which option (by argument count on command line, or line,column in scripts) caused the 'exception'. This is not complete as yet but getting better. Also not complete is 'regard-warnings' handling or its replacement, which will allow you to ignore reported errors and continue processing (as appropriate due to error) in co-processes or interactive usage.

With the IMv7 parser, activated by the `magick` utility, settings are applied to each image in memory in turn (if any). While an option: only need to be applied once globally. Using the other utilities directly, or as an argument to the `magick` CLI (e.g. `magick`) utilizes the legacy parser.

The parenthesis options used to 'push' the current image list, and image settings (EG: '(' and ')' ) on to a stack now has a completely separate image settings stack. That is parenthesis 'push/pull' image lists, and curly braces (EG: '{' and '}' ) will 'push/pull' image settings.

Of course due to the previously reported changes to the underlying channel handling will result be many side effects to almost all options. Here are some specific

Most algorithms update the red, green, blue, black (for CMYK), and alpha channels. Most operators will blend alpha the other color channels, but other operators (and situations) may require this blending to be disabled, and is currently done by removing alpha from the active channels via -channel option. (e.g. magick castle.gif -channel RGB -negate castle.png).

Reading gray-scale images generate an image with only one channel. If that image is to then accept color the -colorspace setting needs to be applied to expand the one channel into separate RGB (or other) channels.

Previously, command-line arguments were limited to 4096 characters, with ImageMagick version 7 the limit has increased to 131072 characters.

Command Changes

Here are a list of changes to the ImageMagick commands:

magick: The "magick" command is the new primary command of the Shell API, replacing the old "convert" command. This allows you to create a 'magick script' of the form "#!/path/to/command/magick -script", or pipe options into a command "magick -script -, as a background process.
magick-script: This the same as "magick", (only command name is different) but which has an implicit "-script" option. This allows you to use it in an "env" style script form. That is a magick script starts with the 'she-bang' line of "#!/usr/bin/env magick-script" allowing the script interpreter to be found anywhere on the users command "PATH". This is required to get around a "one argument she-bang bug" that is common on most UNIX systems (including Linux, but not MacOSX).
animate, compare, composite, conjure, convert, display, identify, import, mogrify, montage, stream: To reduce the footprint of the command-line utilities, these utilities are symbolic links to the magick utility. You can also invoke them from the magick utility, for example, use magick logo: logo.png to invoke the magick utility.

Behavioral Changes

Image settings are applied to each image on the command line. To associate a setting with a particular image, use parenthesis to remove ambiguity. In this example we assign a unique page offset to each image:

magick \( -page +10+20 first.png \) \( -page +100+200 second.png \) ...

By default, image operations such as convolution blends alpha with each channel. To convolve each channel independently, deactivate the alpha channel as follows:

magick ... -alpha discrete -blur 0x1 ...

To remove the alpha values from your image, use -alpha off. If you want to instead persist the alpha channel but not blend the alpha pixels for certain image processing operations, use -alpha deactivate instead.

Some options have changed in ImageMagick version 7. These include:

-channel: the default is to update the RGBA channels, previously, in IMv6, the default was RGB. If you get results that differ from IMv6, you may need to specify -channel RGB on your command line (e.g. -channel RGB -negate).
+combine: This option now requires an argument, the image colorspace (e.g. +combine sRGB).
-format: The %Z image property is no longer supported.
-gamma: Multiple gamma arguments (e.g. -gamma 1,2,3) are no longer supported, instead use -channel (e.g. -channel blue -gamma 2).
-region: This option sets a write mask for the region you define. In IMv6, a separate image was cloned instead, operated on, and the results were composited to the source image. In addition, the draw transformations are relative to the upper left corner of the image, previously in IMv6 they were relative to the region.

Use -define morphology:showKernel=1 to post the morphology or convolution kernel. Previously it was -define showKernel=1.

New Options

ImageMagick version 7 supports these new options, though most are limited to the "magick" command, or to use in "magick" scripts.

{ ... }

Save (and restore) the current image settings (internally known as the "image_info" structure). This is automatically done with parenthesis (EG: '(' and ')') is "-regard-parenthesis" has been set, just as in IMv6. Caution is advised to prevent un-balanced braces errors.

--

End of options, to be used in IMv7 "mogrify" command to explicitly separate the operations to be applied and the images that are to be processed 'in-place'. (not yet implemented). However if not provided, "-read" can still be used to differentiate secondary image reads (for use in things like alpha composition) from the 'in-place' image being processed. In other commands (such as "magick") it is equivalent to an explicit "-read" (see below) of the next option as an image (as it was in IMv6).

-alpha activate/deactivate

enables and disables the alpha channel, respectively, with persistence. This is like on/off in Imagemagick 6. In Imagemagick 7, -alpha off will remove the alpha channel permanently such that -alpha on will not re-enable it.

-alpha discrete

treat the alpha channel independently (do not blend).

-channel-fx expression

exchange, extract, or copy one or more image channels.

The expression consists of one or more channels, either mnemonic or numeric (e.g. red or 0, green or 1, etc.), separated by certain operation symbols as follows:

<=>  exchange two channels (e.g. red<=>blue)
=>   copy one channel to another channel (e.g. red=>green)
=    assign a constant value to a channel (e.g. red=50%)
,    write new image with channels in the specified order (e.g. red, green)
;    add a new output image for the next set of channel operations (e.g. red; green; blue)
|    move to the next input image for the source of channel data (e.g. | gray=>alpha)

For example, to create 3 grayscale images from the red, green, and blue channels of an image, use:

-channel-fx "red; green; blue"

A channel without an operation symbol implies separate (i.e, semicolon).

Here we take an sRGB image and a grayscale image and inject the grayscale image into the alpha channel:

magick wizard.png mask.pgm -channel-fx '| gray=>alpha' wizard-alpha.png

Use a similar command to define a read mask:

magick wizard.png mask.pgm -channel-fx '| gray=>read-mask' wizard-mask.png

Add -debug pixel prior to the -channel-fx option to track the channel morphology.

-exit

Stop processing at this point. No further options will be processed after this option. Can be used in a script to force the "magick" command to exit, without actually closing the pipeline that it is processing options from. May also be used as a 'final' option on the "magick" command line, instead of an implicit output image, to completely prevent any image write. ASIDE: even the "NULL:" coder requires at least one image, for it to 'not write'! This option does not require any images at all.

-read {image}

Explicit read of an image, rather than an implicit read. This allows you to read from filenames that start with an 'option' character, and which otherwise could be mistaken as an option (unknown or otherwise). This will eventually be used in "mogrify" to allow the reading of secondary images, and allow the use of image list operations within that command.

-read-mask

prevent updates to image pixels specified by the mask

-region

supported in ImageMagick 7.0.2-6 and above

-script {file}

In "magick", stop the processing of command line arguments as image operations, and read all further options from the given file or pipeline.

-write-mask

prevent pixels from being written.

Changed Options

These options are known to have changed, in some way.

-bias: The option is no longer recognized. Use -define convolve:bias=value instead.
-draw: The matte primitive is now alpha (e.g. -draw 'alpha 0,0 floodfill').
-negate: currently negates all channels, including alpha if present. As such you may need to use the -channel option to prevent alpha negation (e.g. -channel RGB -negate).
-preview: this option is now an image operator. The PREVIEW image format has been removed.

Deprecated warning given, but will work (for now)

-affine: Replaced by -draw "affine ...". (see transform)
-average: Replaced by -evaluate-sequence Mean.
-box: Replaced by -undercolor.
-deconstruct: Replaced by -layers CompareAny.
-gaussian: Replaced by -gaussian-blur.
-/+map: Replaced by -/+remap.
-/+mask: Replaced by -/+read-mask, -/+write-mask.
-/+matte: Replaced by -alpha Set/Off.
-transform: Replaced by -distort Affine "...".

Deprecated warning given, and ignored (for now)

Almost 'plus' (+) option that did not do anything has been marked as deprecated, and does nothing. It does not even have associated code. For example "+annotate", "+resize", "+clut", and "+draw" .

-affinity: Replaced by -remap.
-maximum: Replaced by -evaluate-sequence Max.
-median: Replaced by -evaluate-sequence Median.
-minimum: Replaced by -evaluate-sequence Min.
-recolor: Replaced by -color-matrix.

Removed / Replaced Options ("no such option" error and abort)

-interpolate filter: remove slow and useless interpolation method
-origin: old option, unknown meaning.
-pen: Replaced by -fill.
-passphrase: old option, unknown meaning

Performance Improvements

Operating on grayscale images is significantly improved as only one channel is required. Previously, grayscale required three channels.

The performance of -fx option has increased by one to two orders of magnitude.

Version 7 Change Summary

Changes from ImageMagick version 6 to version 7 are summarized here:

High Dynamic Range Imaging

ImageMagick version 7 enables HDRI by default. Expect more accurate image processing results with higher memory requirements and possible slower processing times. You can disable this feature for resource constrained system such as a cell phone with a slight loss of accuracy for certain algorithms (e.g. resizing).

Pixels

Pixels are no longer addressed with PixelPacket structure members (e.g. red, green, blue, opacity) but as an array of channels (e.g. pixel[PixelRedChannel]).
Use convenience macros to access pixel channels (e.g. GetPixelRed(), SetPixelRed()).
The black channel for the CMYK colorspace is no longer stored in the index channel, previously accessed with GetAuthenticIndexQueue() and GetCacheViewAuthenticIndexQueue(). Instead it is now a pixel channel and accessed with the convenience pixel macros GetPixelBlack() and SetPixelBlack().
The index channel for colormapped images is no longer stored in the index channel, previously accessed with GetAuthenticIndexQueue() and GetCacheViewAuthenticIndexQueue(). Instead it is now a pixel channel and accessed with the convenience pixel macros GetPixelIndex() and SetPixelIndex().
Use GetPixelChannels() to advance to the next set of pixel channels.
Use the metacontent channel to associate metacontent with each pixel.
All color packet structures, PixelPacket, LongPacket, and DoublePacket, are consolidated to a single color structure, PixelInfo.

Alpha

We support alpha rather than opacity (0 transparent; QuantumRange opaque).
Use GetPixelAlpha() or SetPixelAlpha() to get or set the alpha pixel channel value.

Grayscale

Grayscale images consume one pixel channel in ImageMagick version 7. To process RGB, set the colorspace to RGB (e.g. -colorspace sRGB).

Masks

ImageMagick version 6 only supports read mask in limited circumstances. Version 7 supports both a read and write mask. The read mask is honored by most image-processing algorithms.

MagickCore API

Almost all image processing algorithms are now channel aware.
MagickCore, version 7, adds an ExceptionInfo argument to those methods that lacked it in version 6, e.g. NegateImage(image,MagickTrue,exception);
All method channel analogs have been removed (e.g. BlurImageChannel()), they are no longer necessary, use pixel traits instead.
Public and private API calls are now declared with the GCC visibility attribute. The MagickCore and MagickWand dynamic libraries now only export public struct and function declarations.
The InterpolatePixelMethod enum is now PixelInterpolateMethod.
To account for variable pixel channels, images may now return a different signature.

Deprecated Methods

All ImageMagick version 6 MagickCore and MagickWand deprecated methods are removed and no longer available in ImageMagick version 7.
All MagickCore channel method analogs are removed (e.g. NegateImageChannels()). For version 7, use pixel traits instead.
The FilterImage() method has been removed. Use ConvolveImage() instead.