ClearDrawingWand

ClearDrawingWand() clears resources associated with the drawing wand.

The format of the ClearDrawingWand method is:

void ClearDrawingWand(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand to clear.

CloneDrawingWand

CloneDrawingWand() makes an exact copy of the specified wand.

The format of the CloneDrawingWand method is:

DrawingWand *CloneDrawingWand(const DrawingWand *wand)

A description of each parameter follows:

wand

the magick wand.

DestroyDrawingWand

DestroyDrawingWand() frees all resources associated with the drawing wand. Once the drawing wand has been freed, it should not be used and further unless it re-allocated.

The format of the DestroyDrawingWand method is:

DrawingWand *DestroyDrawingWand(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand to destroy.

DrawAffine

DrawAffine() adjusts the current affine transformation matrix with the specified affine transformation matrix. Note that the current affine transform is adjusted rather than replaced.

The format of the DrawAffine method is:

void DrawAffine(DrawingWand *wand,const AffineMatrix *affine)

A description of each parameter follows:

wand

Drawing wand

affine

Affine matrix parameters

DrawAlpha

DrawAlpha() paints on the image's alpha channel in order to set effected pixels to transparent. The available paint methods are:

    PointMethod: Select the target pixel
    ReplaceMethod: Select any pixel that matches the target pixel.
    FloodfillMethod: Select the target pixel and matching neighbors.
    FillToBorderMethod: Select the target pixel and neighbors not matching
border color.
    ResetMethod: Select all pixels.

The format of the DrawAlpha method is:

void DrawAlpha(DrawingWand *wand,const double x,const double y,
  const PaintMethod paint_method)

A description of each parameter follows:

wand

the drawing wand.

x

x ordinate

y

y ordinate

paint_method

paint method.

DrawAnnotation

DrawAnnotation() draws text on the image.

The format of the DrawAnnotation method is:

void DrawAnnotation(DrawingWand *wand,const double x,
  const double y,const unsigned char *text)

A description of each parameter follows:

wand

the drawing wand.

x

x ordinate to left of text

y

y ordinate to text baseline

text

text to draw

DrawArc

DrawArc() draws an arc falling within a specified bounding rectangle on the image.

The format of the DrawArc method is:

void DrawArc(DrawingWand *wand,const double sx,const double sy,
  const double ex,const double ey,const double sd,const double ed)

A description of each parameter follows:

wand

the drawing wand.

sx

starting x ordinate of bounding rectangle

sy

starting y ordinate of bounding rectangle

ex

ending x ordinate of bounding rectangle

ey

ending y ordinate of bounding rectangle

sd

starting degrees of rotation

ed

ending degrees of rotation

DrawBezier

DrawBezier() draws a bezier curve through a set of points on the image.

The format of the DrawBezier method is:

void DrawBezier(DrawingWand *wand,
  const size_t number_coordinates,const PointInfo *coordinates)

A description of each parameter follows:

wand

the drawing wand.

number_coordinates

number of coordinates

coordinates

coordinates

DrawCircle

DrawCircle() draws a circle on the image.

The format of the DrawCircle method is:

void DrawCircle(DrawingWand *wand,const double ox,
  const double oy,const double px, const double py)

A description of each parameter follows:

wand

the drawing wand.

ox

origin x ordinate

oy

origin y ordinate

px

perimeter x ordinate

py

perimeter y ordinate

DrawClearException

DrawClearException() clear any exceptions associated with the wand.

The format of the DrawClearException method is:

MagickBooleanType DrawClearException(DrawWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawCloneExceptionInfo

DrawCloneExceptionInfo() clones the ExceptionInfo structure within the wand.

The format of the DrawCloneExceptionInfo method is:

ExceptionInfo *DrawCloneExceptionInfo(DrawWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawColor

DrawColor() draws color on image using the current fill color, starting at specified position, and using specified paint method. The available paint methods are:

    PointMethod: Recolors the target pixel
    ReplaceMethod: Recolor any pixel that matches the target pixel.
    FloodfillMethod: Recolors target pixels and matching neighbors.
    ResetMethod: Recolor all pixels.

The format of the DrawColor method is:

void DrawColor(DrawingWand *wand,const double x,const double y,
  const PaintMethod paint_method)

A description of each parameter follows:

wand

the drawing wand.

x

x ordinate.

y

y ordinate.

paint_method

paint method.

DrawComposite

DrawComposite() composites an image onto the current image, using the specified composition operator, specified position, and at the specified size.

The format of the DrawComposite method is:

MagickBooleanType DrawComposite(DrawingWand *wand,
  const CompositeOperator compose,const double x,
  const double y,const double width,const double height,
  MagickWand *magick_wand)

A description of each parameter follows:

wand

the drawing wand.

compose

composition operator

x

x ordinate of top left corner

y

y ordinate of top left corner

width

Width to resize image to prior to compositing. Specify zero to use existing width.

height

Height to resize image to prior to compositing. Specify zero to use existing height.

magick_wand

Image to composite is obtained from this wand.

DrawComment

DrawComment() adds a comment to a vector output stream.

The format of the DrawComment method is:

void DrawComment(DrawingWand *wand,const char *comment)

A description of each parameter follows:

wand

the drawing wand.

comment

comment text

DrawEllipse

DrawEllipse() draws an ellipse on the image.

The format of the DrawEllipse method is:

 void DrawEllipse(DrawingWand *wand,const double ox,const double oy,
   const double rx,const double ry,const double start,const double end)

A description of each parameter follows:

wand

the drawing wand.

ox

origin x ordinate

oy

origin y ordinate

rx

radius in x

ry

radius in y

start

starting rotation in degrees

end

ending rotation in degrees

DrawGetBorderColor

DrawGetBorderColor() returns the border color used for drawing bordered objects.

The format of the DrawGetBorderColor method is:

void DrawGetBorderColor(const DrawingWand *wand,
  PixelWand *border_color)

A description of each parameter follows:

wand

the drawing wand.

border_color

Return the border color.

DrawGetClipPath

DrawGetClipPath() obtains the current clipping path ID. The value returned must be deallocated by the user when it is no longer needed.

The format of the DrawGetClipPath method is:

char *DrawGetClipPath(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetClipRule

DrawGetClipRule() returns the current polygon fill rule to be used by the clipping path.

The format of the DrawGetClipRule method is:

     FillRule DrawGetClipRule(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetClipUnits

DrawGetClipUnits() returns the interpretation of clip path units.

The format of the DrawGetClipUnits method is:

ClipPathUnits DrawGetClipUnits(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetDensity

DrawGetDensity() obtains the vertical and horizontal resolution. The value returned must be deallocated by the user when it is no longer needed.

The format of the DrawGetDensity method is:

char *DrawGetDensity(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetException

DrawGetException() returns the severity, reason, and description of any error that occurs when using other methods in this API.

The format of the DrawGetException method is:

char *DrawGetException(const DrawWand *wand,
  ExceptionType *severity)

A description of each parameter follows:

wand

the drawing wand.

severity

the severity of the error is returned here.

DrawGetExceptionType

DrawGetExceptionType() the exception type associated with the wand. If no exception has occurred, UndefinedExceptionType is returned.

The format of the DrawGetExceptionType method is:

ExceptionType DrawGetExceptionType(const DrawWand *wand)

A description of each parameter follows:

wand

the magick wand.

DrawGetFillColor

DrawGetFillColor() returns the fill color used for drawing filled objects.

The format of the DrawGetFillColor method is:

void DrawGetFillColor(const DrawingWand *wand,
  PixelWand *fill_color)

A description of each parameter follows:

wand

the drawing wand.

fill_color

Return the fill color.

DrawGetFillOpacity

DrawGetFillOpacity() returns the alpha used when drawing using the fill color or fill texture. Fully opaque is 1.0.

The format of the DrawGetFillOpacity method is:

double DrawGetFillOpacity(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetFillRule

DrawGetFillRule() returns the fill rule used while drawing polygons.

The format of the DrawGetFillRule method is:

FillRule DrawGetFillRule(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetFont

DrawGetFont() returns a null-terminated string specifying the font used when annotating with text. The value returned must be freed by the user when no longer needed.

The format of the DrawGetFont method is:

char *DrawGetFont(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetFontFamily

DrawGetFontFamily() returns the font family to use when annotating with text. The value returned must be freed by the user when it is no longer needed.

The format of the DrawGetFontFamily method is:

char *DrawGetFontFamily(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetFontResolution

DrawGetFontResolution() gets the image X and Y resolution.

The format of the DrawGetFontResolution method is:

MagickBooleanType DrawGetFontResolution(const DrawingWand *wand,
  double *x,double *y)

A description of each parameter follows:

wand

the magick wand.

x

the x-resolution.

y

the y-resolution.

DrawGetFontSize

DrawGetFontSize() returns the font pointsize used when annotating with text.

The format of the DrawGetFontSize method is:

double DrawGetFontSize(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetFontStretch

DrawGetFontStretch() returns the font stretch used when annotating with text.

The format of the DrawGetFontStretch method is:

StretchType DrawGetFontStretch(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetFontStyle

DrawGetFontStyle() returns the font style used when annotating with text.

The format of the DrawGetFontStyle method is:

StyleType DrawGetFontStyle(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetFontWeight

DrawGetFontWeight() returns the font weight used when annotating with text.

The format of the DrawGetFontWeight method is:

size_t DrawGetFontWeight(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetGravity

DrawGetGravity() returns the text placement gravity used when annotating with text.

The format of the DrawGetGravity method is:

GravityType DrawGetGravity(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetOpacity

DrawGetOpacity() returns the alpha used when drawing with the fill or stroke color or texture. Fully opaque is 1.0.

The format of the DrawGetOpacity method is:

double DrawGetOpacity(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetStrokeAntialias

DrawGetStrokeAntialias() returns the current stroke antialias setting. Stroked outlines are antialiased by default. When antialiasing is disabled stroked pixels are thresholded to determine if the stroke color or underlying canvas color should be used.

The format of the DrawGetStrokeAntialias method is:

MagickBooleanType DrawGetStrokeAntialias(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetStrokeColor

DrawGetStrokeColor() returns the color used for stroking object outlines.

The format of the DrawGetStrokeColor method is:

void DrawGetStrokeColor(const DrawingWand *wand,
  PixelWand *stroke_color)

A description of each parameter follows:

wand

the drawing wand.

stroke_color

Return the stroke color.

DrawGetStrokeDashArray

DrawGetStrokeDashArray() returns an array representing the pattern of dashes and gaps used to stroke paths (see DrawSetStrokeDashArray). The array must be freed once it is no longer required by the user.

The format of the DrawGetStrokeDashArray method is:

double *DrawGetStrokeDashArray(const DrawingWand *wand,
  size_t *number_elements)

A description of each parameter follows:

wand

the drawing wand.

number_elements

address to place number of elements in dash array

DrawGetStrokeDashOffset

DrawGetStrokeDashOffset() returns the offset into the dash pattern to start the dash.

The format of the DrawGetStrokeDashOffset method is:

double DrawGetStrokeDashOffset(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetStrokeLineCap

DrawGetStrokeLineCap() returns the shape to be used at the end of open subpaths when they are stroked. Values of LineCap are UndefinedCap, ButtCap, RoundCap, and SquareCap.

The format of the DrawGetStrokeLineCap method is:

LineCap DrawGetStrokeLineCap(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetStrokeLineJoin

DrawGetStrokeLineJoin() returns the shape to be used at the corners of paths (or other vector shapes) when they are stroked. Values of LineJoin are UndefinedJoin, MiterJoin, RoundJoin, and BevelJoin.

The format of the DrawGetStrokeLineJoin method is:

LineJoin DrawGetStrokeLineJoin(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetStrokeMiterLimit

DrawGetStrokeMiterLimit() returns the miter limit. When two line segments meet at a sharp angle and miter joins have been specified for 'lineJoin', it is possible for the miter to extend far beyond the thickness of the line stroking the path. The miterLimit' imposes a limit on the ratio of the miter length to the 'lineWidth'.

The format of the DrawGetStrokeMiterLimit method is:

size_t DrawGetStrokeMiterLimit(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetStrokeOpacity

DrawGetStrokeOpacity() returns the alpha of stroked object outlines.

The format of the DrawGetStrokeOpacity method is:

double DrawGetStrokeOpacity(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetStrokeWidth

DrawGetStrokeWidth() returns the width of the stroke used to draw object outlines.

The format of the DrawGetStrokeWidth method is:

double DrawGetStrokeWidth(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextAlignment

DrawGetTextAlignment() returns the alignment applied when annotating with text.

The format of the DrawGetTextAlignment method is:

AlignType DrawGetTextAlignment(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextAntialias

DrawGetTextAntialias() returns the current text antialias setting, which determines whether text is antialiased. Text is antialiased by default.

The format of the DrawGetTextAntialias method is:

MagickBooleanType DrawGetTextAntialias(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextDecoration

DrawGetTextDecoration() returns the decoration applied when annotating with text.

The format of the DrawGetTextDecoration method is:

DecorationType DrawGetTextDecoration(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextDirection

DrawGetTextDirection() returns the direction that will be used when annotating with text.

The format of the DrawGetTextDirection method is:

DirectionType DrawGetTextDirection(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextEncoding

DrawGetTextEncoding() returns a null-terminated string which specifies the code set used for text annotations. The string must be freed by the user once it is no longer required.

The format of the DrawGetTextEncoding method is:

char *DrawGetTextEncoding(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextKerning

DrawGetTextKerning() gets the spacing between characters in text.

The format of the DrawSetFontKerning method is:

double DrawGetTextKerning(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextInterlineSpacing

DrawGetTextInterlineSpacing() gets the spacing between lines in text.

The format of the DrawGetTextInterlineSpacing method is:

double DrawGetTextInterlineSpacing(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextInterwordSpacing

DrawGetTextInterwordSpacing() gets the spacing between words in text.

The format of the DrawSetFontKerning method is:

double DrawGetTextInterwordSpacing(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTypeMetrics

DrawGetTypeMetrics() returns the following information for the specified font and text:

    character width
    character height
    ascender
    descender
    text width
    text height
    maximum horizontal advance
    bounds: x1
    bounds: y1
    bounds: x2
    bounds: y2
    origin: x
    origin: y
    underline position
    underline thickness

The format of the DrawGetTypeMetrics method is:

MagickBooleanType DrawGetTypeMetrics(const DrawingWand *wand,
  const char *text,MagickBooleanType ignore_newlines,
$  TypeMetric *metrics)

A description of each parameter follows:

wand

the drawing wand.

text

text to draw.

metrics

Return the font metrics in this structure.

ignore_newlines

indicates whether newlines should be ignored.

metrics

Return the font metrics in this structure.

DrawGetVectorGraphics

DrawGetVectorGraphics() returns a null-terminated string which specifies the vector graphics generated by any graphics calls made since the wand was instantiated. The string must be freed by the user once it is no longer required.

The format of the DrawGetVectorGraphics method is:

char *DrawGetVectorGraphics(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawGetTextUnderColor

DrawGetTextUnderColor() returns the color of a background rectangle to place under text annotations.

The format of the DrawGetTextUnderColor method is:

void DrawGetTextUnderColor(const DrawingWand *wand,
  PixelWand *under_color)

A description of each parameter follows:

wand

the drawing wand.

under_color

Return the under color.

DrawLine

DrawLine() draws a line on the image using the current stroke color, stroke alpha, and stroke width.

The format of the DrawLine method is:

void DrawLine(DrawingWand *wand,const double sx,const double sy,
  const double ex,const double ey)

A description of each parameter follows:

wand

the drawing wand.

sx

starting x ordinate

sy

starting y ordinate

ex

ending x ordinate

ey

ending y ordinate

DrawPathClose

DrawPathClose() adds a path element to the current path which closes the current subpath by drawing a straight line from the current point to the current subpath's most recent starting point (usually, the most recent moveto point).

The format of the DrawPathClose method is:

void DrawPathClose(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawPathCurveToAbsolute

DrawPathCurveToAbsolute() draws a cubic Bezier curve from the current point to (x,y) using (x1,y1) as the control point at the beginning of the curve and (x2,y2) as the control point at the end of the curve using absolute coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToAbsolute method is:

void DrawPathCurveToAbsolute(DrawingWand *wand,const double x1,
  const double y1,const double x2,const double y2,const double x,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

x1

x ordinate of control point for curve beginning

y1

y ordinate of control point for curve beginning

x2

x ordinate of control point for curve ending

y2

y ordinate of control point for curve ending

x

x ordinate of the end of the curve

y

y ordinate of the end of the curve

DrawPathCurveToRelative

DrawPathCurveToRelative() draws a cubic Bezier curve from the current point to (x,y) using (x1,y1) as the control point at the beginning of the curve and (x2,y2) as the control point at the end of the curve using relative coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToRelative method is:

void DrawPathCurveToRelative(DrawingWand *wand,const double x1,
  const double y1,const double x2,const double y2,const double x,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

x1

x ordinate of control point for curve beginning

y1

y ordinate of control point for curve beginning

x2

x ordinate of control point for curve ending

y2

y ordinate of control point for curve ending

x

x ordinate of the end of the curve

y

y ordinate of the end of the curve

DrawPathCurveToQuadraticBezierAbsolute

DrawPathCurveToQuadraticBezierAbsolute() draws a quadratic Bezier curve from the current point to (x,y) using (x1,y1) as the control point using absolute coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToQuadraticBezierAbsolute method is:

void DrawPathCurveToQuadraticBezierAbsolute(DrawingWand *wand,
  const double x1,const double y1,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x1

x ordinate of the control point

y1

y ordinate of the control point

x

x ordinate of final point

y

y ordinate of final point

DrawPathCurveToQuadraticBezierRelative

DrawPathCurveToQuadraticBezierRelative() draws a quadratic Bezier curve from the current point to (x,y) using (x1,y1) as the control point using relative coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToQuadraticBezierRelative method is:

void DrawPathCurveToQuadraticBezierRelative(DrawingWand *wand,
  const double x1,const double y1,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x1

x ordinate of the control point

y1

y ordinate of the control point

x

x ordinate of final point

y

y ordinate of final point

DrawPathCurveToQuadraticBezierSmoothAbsolute

DrawPathCurveToQuadraticBezierSmoothAbsolute() draws a quadratic Bezier curve (using absolute coordinates) from the current point to (x,y). The control point is assumed to be the reflection of the control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not a DrawPathCurveToQuadraticBezierAbsolute, DrawPathCurveToQuadraticBezierRelative, DrawPathCurveToQuadraticBezierSmoothAbsolute or DrawPathCurveToQuadraticBezierSmoothRelative, assume the control point is coincident with the current point.). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToQuadraticBezierSmoothAbsolute method is:

void DrawPathCurveToQuadraticBezierSmoothAbsolute(
  DrawingWand *wand,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x

x ordinate of final point

y

y ordinate of final point

DrawPathCurveToQuadraticBezierSmoothRelative

DrawPathCurveToQuadraticBezierSmoothRelative() draws a quadratic Bezier curve (using relative coordinates) from the current point to (x,y). The control point is assumed to be the reflection of the control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not a DrawPathCurveToQuadraticBezierAbsolute, DrawPathCurveToQuadraticBezierRelative, DrawPathCurveToQuadraticBezierSmoothAbsolute or DrawPathCurveToQuadraticBezierSmoothRelative, assume the control point is coincident with the current point.). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToQuadraticBezierSmoothRelative method is:

void DrawPathCurveToQuadraticBezierSmoothRelative(DrawingWand *wand,
  const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x

x ordinate of final point

y

y ordinate of final point

DrawPathCurveToSmoothAbsolute

DrawPathCurveToSmoothAbsolute() draws a cubic Bezier curve from the current point to (x,y) using absolute coordinates. The first control point is assumed to be the reflection of the second control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not an DrawPathCurveToAbsolute, DrawPathCurveToRelative, DrawPathCurveToSmoothAbsolute or DrawPathCurveToSmoothRelative, assume the first control point is coincident with the current point.) (x2,y2) is the second control point (i.e., the control point at the end of the curve). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToSmoothAbsolute method is:

void DrawPathCurveToSmoothAbsolute(DrawingWand *wand,
  const double x2,const double y2,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x2

x ordinate of second control point

y2

y ordinate of second control point

x

x ordinate of termination point

y

y ordinate of termination point

DrawPathCurveToSmoothRelative

DrawPathCurveToSmoothRelative() draws a cubic Bezier curve from the current point to (x,y) using relative coordinates. The first control point is assumed to be the reflection of the second control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not an DrawPathCurveToAbsolute, DrawPathCurveToRelative, DrawPathCurveToSmoothAbsolute or DrawPathCurveToSmoothRelative, assume the first control point is coincident with the current point.) (x2,y2) is the second control point (i.e., the control point at the end of the curve). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.

The format of the DrawPathCurveToSmoothRelative method is:

void DrawPathCurveToSmoothRelative(DrawingWand *wand,
  const double x2,const double y2,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x2

x ordinate of second control point

y2

y ordinate of second control point

x

x ordinate of termination point

y

y ordinate of termination point

DrawPathEllipticArcAbsolute

DrawPathEllipticArcAbsolute() draws an elliptical arc from the current point to (x, y) using absolute coordinates. The size and orientation of the ellipse are defined by two radii (rx, ry) and an xAxisRotation, which indicates how the ellipse as a whole is rotated relative to the current coordinate system. The center (cx, cy) of the ellipse is calculated automagically to satisfy the constraints imposed by the other parameters. largeArcFlag and sweepFlag contribute to the automatic calculations and help determine how the arc is drawn. If largeArcFlag is true then draw the larger of the available arcs. If sweepFlag is true, then draw the arc matching a clock-wise rotation.

The format of the DrawPathEllipticArcAbsolute method is:

void DrawPathEllipticArcAbsolute(DrawingWand *wand,
  const double rx,const double ry,const double x_axis_rotation,
  const MagickBooleanType large_arc_flag,
  const MagickBooleanType sweep_flag,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

rx

x radius

ry

y radius

x_axis_rotation

indicates how the ellipse as a whole is rotated relative to the current coordinate system

large_arc_flag

If non-zero (true) then draw the larger of the available arcs

sweep_flag

If non-zero (true) then draw the arc matching a clock-wise rotation

DrawPathEllipticArcRelative

DrawPathEllipticArcRelative() draws an elliptical arc from the current point to (x, y) using relative coordinates. The size and orientation of the ellipse are defined by two radii (rx, ry) and an xAxisRotation, which indicates how the ellipse as a whole is rotated relative to the current coordinate system. The center (cx, cy) of the ellipse is calculated automagically to satisfy the constraints imposed by the other parameters. largeArcFlag and sweepFlag contribute to the automatic calculations and help determine how the arc is drawn. If largeArcFlag is true then draw the larger of the available arcs. If sweepFlag is true, then draw the arc matching a clock-wise rotation.

The format of the DrawPathEllipticArcRelative method is:

void DrawPathEllipticArcRelative(DrawingWand *wand,
  const double rx,const double ry,const double x_axis_rotation,
  const MagickBooleanType large_arc_flag,
  const MagickBooleanType sweep_flag,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

rx

x radius

ry

y radius

x_axis_rotation

indicates how the ellipse as a whole is rotated relative to the current coordinate system

large_arc_flag

If non-zero (true) then draw the larger of the available arcs

sweep_flag

If non-zero (true) then draw the arc matching a clock-wise rotation

DrawPathFinish

DrawPathFinish() terminates the current path.

The format of the DrawPathFinish method is:

void DrawPathFinish(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawPathLineToAbsolute

DrawPathLineToAbsolute() draws a line path from the current point to the given coordinate using absolute coordinates. The coordinate then becomes the new current point.

The format of the DrawPathLineToAbsolute method is:

void DrawPathLineToAbsolute(DrawingWand *wand,const double x,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

x

target x ordinate

y

target y ordinate

DrawPathLineToRelative

DrawPathLineToRelative() draws a line path from the current point to the given coordinate using relative coordinates. The coordinate then becomes the new current point.

The format of the DrawPathLineToRelative method is:

void DrawPathLineToRelative(DrawingWand *wand,const double x,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

x

target x ordinate

y

target y ordinate

DrawPathLineToHorizontalAbsolute

DrawPathLineToHorizontalAbsolute() draws a horizontal line path from the current point to the target point using absolute coordinates. The target point then becomes the new current point.

The format of the DrawPathLineToHorizontalAbsolute method is:

void DrawPathLineToHorizontalAbsolute(DrawingWand *wand,const double x)

A description of each parameter follows:

wand

the drawing wand.

x

target x ordinate

DrawPathLineToHorizontalRelative

DrawPathLineToHorizontalRelative() draws a horizontal line path from the current point to the target point using relative coordinates. The target point then becomes the new current point.

The format of the DrawPathLineToHorizontalRelative method is:

void DrawPathLineToHorizontalRelative(DrawingWand *wand,
  const double x)

A description of each parameter follows:

wand

the drawing wand.

x

target x ordinate

DrawPathLineToVerticalAbsolute

DrawPathLineToVerticalAbsolute() draws a vertical line path from the current point to the target point using absolute coordinates. The target point then becomes the new current point.

The format of the DrawPathLineToVerticalAbsolute method is:

void DrawPathLineToVerticalAbsolute(DrawingWand *wand,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

y

target y ordinate

DrawPathLineToVerticalRelative

DrawPathLineToVerticalRelative() draws a vertical line path from the current point to the target point using relative coordinates. The target point then becomes the new current point.

The format of the DrawPathLineToVerticalRelative method is:

void DrawPathLineToVerticalRelative(DrawingWand *wand,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

y

target y ordinate

DrawPathMoveToAbsolute

DrawPathMoveToAbsolute() starts a new sub-path at the given coordinate using absolute coordinates. The current point then becomes the specified coordinate.

The format of the DrawPathMoveToAbsolute method is:

void DrawPathMoveToAbsolute(DrawingWand *wand,const double x,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

x

target x ordinate

y

target y ordinate

DrawPathMoveToRelative

DrawPathMoveToRelative() starts a new sub-path at the given coordinate using relative coordinates. The current point then becomes the specified coordinate.

The format of the DrawPathMoveToRelative method is:

void DrawPathMoveToRelative(DrawingWand *wand,const double x,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

x

target x ordinate

y

target y ordinate

DrawPathStart

DrawPathStart() declares the start of a path drawing list which is terminated by a matching DrawPathFinish() command. All other DrawPath commands must be enclosed between a DrawPathStart() and a DrawPathFinish() command. This is because path drawing commands are subordinate commands and they do not function by themselves.

The format of the DrawPathStart method is:

void DrawPathStart(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawPoint

DrawPoint() draws a point using the current fill color.

The format of the DrawPoint method is:

void DrawPoint(DrawingWand *wand,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x

target x coordinate

y

target y coordinate

DrawPolygon

DrawPolygon() draws a polygon using the current stroke, stroke width, and fill color or texture, using the specified array of coordinates.

The format of the DrawPolygon method is:

void DrawPolygon(DrawingWand *wand,
  const size_t number_coordinates,const PointInfo *coordinates)

A description of each parameter follows:

wand

the drawing wand.

number_coordinates

number of coordinates

coordinates

coordinate array

DrawPolyline

DrawPolyline() draws a polyline using the current stroke, stroke width, and fill color or texture, using the specified array of coordinates.

The format of the DrawPolyline method is:

void DrawPolyline(DrawingWand *wand,
  const size_t number_coordinates,const PointInfo *coordinates)

A description of each parameter follows:

wand

the drawing wand.

number_coordinates

number of coordinates

coordinates

coordinate array

DrawPopClipPath

DrawPopClipPath() terminates a clip path definition.

The format of the DrawPopClipPath method is:

void DrawPopClipPath(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawPopDefs

DrawPopDefs() terminates a definition list.

The format of the DrawPopDefs method is:

void DrawPopDefs(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawPopPattern

DrawPopPattern() terminates a pattern definition.

The format of the DrawPopPattern method is:

MagickBooleanType DrawPopPattern(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawPushClipPath

DrawPushClipPath() starts a clip path definition which is comprized of any number of drawing commands and terminated by a DrawPopClipPath() command.

The format of the DrawPushClipPath method is:

void DrawPushClipPath(DrawingWand *wand,const char *clip_mask_id)

A description of each parameter follows:

wand

the drawing wand.

clip_mask_id

string identifier to associate with the clip path for later use.

DrawPushDefs

DrawPushDefs() indicates that commands up to a terminating DrawPopDefs() command create named elements (e.g. clip-paths, textures, etc.) which may safely be processed earlier for the sake of efficiency.

The format of the DrawPushDefs method is:

void DrawPushDefs(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawPushPattern

DrawPushPattern() indicates that subsequent commands up to a DrawPopPattern() command comprise the definition of a named pattern. The pattern space is assigned top left corner coordinates, a width and height, and becomes its own drawing space. Anything which can be drawn may be used in a pattern definition. Named patterns may be used as stroke or brush definitions.

The format of the DrawPushPattern method is:

MagickBooleanType DrawPushPattern(DrawingWand *wand,
  const char *pattern_id,const double x,const double y,
  const double width,const double height)

A description of each parameter follows:

wand

the drawing wand.

pattern_id

pattern identification for later reference

x

x ordinate of top left corner

y

y ordinate of top left corner

width

width of pattern space

height

height of pattern space

DrawRectangle

DrawRectangle() draws a rectangle given two coordinates and using the current stroke, stroke width, and fill settings.

The format of the DrawRectangle method is:

void DrawRectangle(DrawingWand *wand,const double x1,
  const double y1,const double x2,const double y2)

A description of each parameter follows:

x1

x ordinate of first coordinate

y1

y ordinate of first coordinate

x2

x ordinate of second coordinate

y2

y ordinate of second coordinate

DrawResetVectorGraphics

DrawResetVectorGraphics() resets the vector graphics associated with the specified wand.

The format of the DrawResetVectorGraphics method is:

void DrawResetVectorGraphics(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

DrawRotate

DrawRotate() applies the specified rotation to the current coordinate space.

The format of the DrawRotate method is:

void DrawRotate(DrawingWand *wand,const double degrees)

A description of each parameter follows:

wand

the drawing wand.

degrees

degrees of rotation

DrawRoundRectangle

DrawRoundRectangle() draws a rounded rectangle given two coordinates, x & y corner radiuses and using the current stroke, stroke width, and fill settings.

The format of the DrawRoundRectangle method is:

void DrawRoundRectangle(DrawingWand *wand,double x1,double y1,
  double x2,double y2,double rx,double ry)

A description of each parameter follows:

wand

the drawing wand.

x1

x ordinate of first coordinate

y1

y ordinate of first coordinate

x2

x ordinate of second coordinate

y2

y ordinate of second coordinate

rx

radius of corner in horizontal direction

ry

radius of corner in vertical direction

DrawScale

DrawScale() adjusts the scaling factor to apply in the horizontal and vertical directions to the current coordinate space.

The format of the DrawScale method is:

void DrawScale(DrawingWand *wand,const double x,const double y)

A description of each parameter follows:

wand

the drawing wand.

x

horizontal scale factor

y

vertical scale factor

DrawSetBorderColor

DrawSetBorderColor() sets the border color to be used for drawing bordered objects.

The format of the DrawSetBorderColor method is:

void DrawSetBorderColor(DrawingWand *wand,const PixelWand *border_wand)

A description of each parameter follows:

wand

the drawing wand.

border_wand

border wand.

DrawSetClipPath

DrawSetClipPath() associates a named clipping path with the image. Only the areas drawn on by the clipping path will be modified as ssize_t as it remains in effect.

The format of the DrawSetClipPath method is:

MagickBooleanType DrawSetClipPath(DrawingWand *wand,
  const char *clip_mask)

A description of each parameter follows:

wand

the drawing wand.

clip_mask

name of clipping path to associate with image

DrawSetClipRule

DrawSetClipRule() set the polygon fill rule to be used by the clipping path.

The format of the DrawSetClipRule method is:

void DrawSetClipRule(DrawingWand *wand,const FillRule fill_rule)

A description of each parameter follows:

wand

the drawing wand.

fill_rule

fill rule (EvenOddRule or NonZeroRule)

DrawSetClipUnits

DrawSetClipUnits() sets the interpretation of clip path units.

The format of the DrawSetClipUnits method is:

void DrawSetClipUnits(DrawingWand *wand,
  const ClipPathUnits clip_units)

A description of each parameter follows:

wand

the drawing wand.

clip_units

units to use (UserSpace, UserSpaceOnUse, or ObjectBoundingBox)

DrawSetDensity

DrawSetDensity() sets the vertical and horizontal resolution.

The format of the DrawSetDensity method is:

MagickBooleanType DrawSetDensity(DrawingWand *wand,
  const char *density)

A description of each parameter follows:

wand

the drawing wand.

density

the vertical and horizontal resolution.

DrawSetFillColor

DrawSetFillColor() sets the fill color to be used for drawing filled objects.

The format of the DrawSetFillColor method is:

void DrawSetFillColor(DrawingWand *wand,const PixelWand *fill_wand)

A description of each parameter follows:

wand

the drawing wand.

fill_wand

fill wand.

DrawSetFillOpacity

DrawSetFillOpacity() sets the alpha to use when drawing using the fill color or fill texture. Fully opaque is 1.0.

The format of the DrawSetFillOpacity method is:

void DrawSetFillOpacity(DrawingWand *wand,const double fill_alpha)

A description of each parameter follows:

wand

the drawing wand.

fill_opacity

fill opacity

DrawSetFontResolution

DrawSetFontResolution() sets the image resolution.

The format of the DrawSetFontResolution method is:

MagickBooleanType DrawSetFontResolution(DrawingWand *wand,
  const double x_resolution,const double y_resolution)

A description of each parameter follows:

wand

the magick wand.

x_resolution

the image x resolution.

y_resolution

the image y resolution.

DrawSetOpacity

DrawSetOpacity() sets the alpha to use when drawing using the fill or stroke color or texture. Fully opaque is 1.0.

The format of the DrawSetOpacity method is:

void DrawSetOpacity(DrawingWand *wand,const double alpha)

A description of each parameter follows:

wand

the drawing wand.

opacity

fill and stroke opacity. The value 1.0 is opaque.

DrawSetFillPatternURL

DrawSetFillPatternURL() sets the URL to use as a fill pattern for filling objects. Only local URLs ("#identifier") are supported at this time. These local URLs are normally created by defining a named fill pattern with DrawPushPattern/DrawPopPattern.

The format of the DrawSetFillPatternURL method is:

MagickBooleanType DrawSetFillPatternURL(DrawingWand *wand,
  const char *fill_url)

A description of each parameter follows:

wand

the drawing wand.

fill_url

URL to use to obtain fill pattern.

DrawSetFillRule

DrawSetFillRule() sets the fill rule to use while drawing polygons.

The format of the DrawSetFillRule method is:

void DrawSetFillRule(DrawingWand *wand,const FillRule fill_rule)

A description of each parameter follows:

wand

the drawing wand.

fill_rule

fill rule (EvenOddRule or NonZeroRule)

DrawSetFont

DrawSetFont() sets the fully-specified font to use when annotating with text.

The format of the DrawSetFont method is:

MagickBooleanType DrawSetFont(DrawingWand *wand,const char *font_name)

A description of each parameter follows:

wand

the drawing wand.

font_name

font name

DrawSetFontFamily

DrawSetFontFamily() sets the font family to use when annotating with text.

The format of the DrawSetFontFamily method is:

MagickBooleanType DrawSetFontFamily(DrawingWand *wand,
  const char *font_family)

A description of each parameter follows:

wand

the drawing wand.

font_family

font family

DrawSetFontSize

DrawSetFontSize() sets the font pointsize to use when annotating with text.

The format of the DrawSetFontSize method is:

void DrawSetFontSize(DrawingWand *wand,const double pointsize)

A description of each parameter follows:

wand

the drawing wand.

pointsize

text pointsize

DrawSetFontStretch

DrawSetFontStretch() sets the font stretch to use when annotating with text. The AnyStretch enumeration acts as a wild-card "don't care" option.

The format of the DrawSetFontStretch method is:

void DrawSetFontStretch(DrawingWand *wand,
  const StretchType font_stretch)

A description of each parameter follows:

wand

the drawing wand.

font_stretch

font stretch (NormalStretch, UltraCondensedStretch, CondensedStretch, SemiCondensedStretch, SemiExpandedStretch, ExpandedStretch, ExtraExpandedStretch, UltraExpandedStretch, AnyStretch)

DrawSetFontStyle

DrawSetFontStyle() sets the font style to use when annotating with text. The AnyStyle enumeration acts as a wild-card "don't care" option.

The format of the DrawSetFontStyle method is:

void DrawSetFontStyle(DrawingWand *wand,const StyleType style)

A description of each parameter follows:

wand

the drawing wand.

style

font style (NormalStyle, ItalicStyle, ObliqueStyle, AnyStyle)

DrawSetFontWeight

DrawSetFontWeight() sets the font weight to use when annotating with text.

The format of the DrawSetFontWeight method is:

void DrawSetFontWeight(DrawingWand *wand,
  const size_t font_weight)

A description of each parameter follows:

wand

the drawing wand.

font_weight

font weight (valid range 100-900)

DrawSetGravity

DrawSetGravity() sets the text placement gravity to use when annotating with text.

The format of the DrawSetGravity method is:

void DrawSetGravity(DrawingWand *wand,const GravityType gravity)

A description of each parameter follows:

wand

the drawing wand.

gravity

positioning gravity (NorthWestGravity, NorthGravity, NorthEastGravity, WestGravity, CenterGravity, EastGravity, SouthWestGravity, SouthGravity, SouthEastGravity)

DrawSetStrokeColor

DrawSetStrokeColor() sets the color used for stroking object outlines.

The format of the DrawSetStrokeColor method is:

void DrawSetStrokeColor(DrawingWand *wand,
  const PixelWand *stroke_wand)

A description of each parameter follows:

wand

the drawing wand.

stroke_wand

stroke wand.

DrawSetStrokePatternURL

DrawSetStrokePatternURL() sets the pattern used for stroking object outlines.

The format of the DrawSetStrokePatternURL method is:

MagickBooleanType DrawSetStrokePatternURL(DrawingWand *wand,
  const char *stroke_url)

A description of each parameter follows:

wand

the drawing wand.

stroke_url

URL specifying pattern ID (e.g. "#pattern_id")

DrawSetStrokeAntialias

DrawSetStrokeAntialias() controls whether stroked outlines are antialiased. Stroked outlines are antialiased by default. When antialiasing is disabled stroked pixels are thresholded to determine if the stroke color or underlying canvas color should be used.

The format of the DrawSetStrokeAntialias method is:

void DrawSetStrokeAntialias(DrawingWand *wand,
  const MagickBooleanType stroke_antialias)

A description of each parameter follows:

wand

the drawing wand.

stroke_antialias

set to false (zero) to disable antialiasing

DrawSetStrokeDashArray

DrawSetStrokeDashArray() specifies the pattern of dashes and gaps used to stroke paths. The stroke dash array represents an array of numbers that specify the lengths of alternating dashes and gaps in pixels. If an odd number of values is provided, then the list of values is repeated to yield an even number of values. To remove an existing dash array, pass a zero number_elements argument and null dasharray. A typical stroke dash array might contain the members 5 3 2.

The format of the DrawSetStrokeDashArray method is:

MagickBooleanType DrawSetStrokeDashArray(DrawingWand *wand,
  const size_t number_elements,const double *dasharray)

A description of each parameter follows:

wand

the drawing wand.

number_elements

number of elements in dash array

dasharray

dash array values

DrawSetStrokeDashOffset

DrawSetStrokeDashOffset() specifies the offset into the dash pattern to start the dash.

The format of the DrawSetStrokeDashOffset method is:

void DrawSetStrokeDashOffset(DrawingWand *wand,
  const double dash_offset)

A description of each parameter follows:

wand

the drawing wand.

dash_offset

dash offset

DrawSetStrokeLineCap

DrawSetStrokeLineCap() specifies the shape to be used at the end of open subpaths when they are stroked. Values of LineCap are UndefinedCap, ButtCap, RoundCap, and SquareCap.

The format of the DrawSetStrokeLineCap method is:

void DrawSetStrokeLineCap(DrawingWand *wand,
  const LineCap linecap)

A description of each parameter follows:

wand

the drawing wand.

linecap

linecap style

DrawSetStrokeLineJoin

DrawSetStrokeLineJoin() specifies the shape to be used at the corners of paths (or other vector shapes) when they are stroked. Values of LineJoin are UndefinedJoin, MiterJoin, RoundJoin, and BevelJoin.

The format of the DrawSetStrokeLineJoin method is:

void DrawSetStrokeLineJoin(DrawingWand *wand,
  const LineJoin linejoin)

A description of each parameter follows:

wand

the drawing wand.

linejoin

line join style

DrawSetStrokeMiterLimit

DrawSetStrokeMiterLimit() specifies the miter limit. When two line segments meet at a sharp angle and miter joins have been specified for 'lineJoin', it is possible for the miter to extend far beyond the thickness of the line stroking the path. The miterLimit' imposes a limit on the ratio of the miter length to the 'lineWidth'.

The format of the DrawSetStrokeMiterLimit method is:

void DrawSetStrokeMiterLimit(DrawingWand *wand,
  const size_t miterlimit)

A description of each parameter follows:

wand

the drawing wand.

miterlimit

miter limit

DrawSetStrokeOpacity

DrawSetStrokeOpacity() specifies the alpha of stroked object outlines.

The format of the DrawSetStrokeOpacity method is:

void DrawSetStrokeOpacity(DrawingWand *wand,
  const double stroke_alpha)

A description of each parameter follows:

wand

the drawing wand.

opacity

stroke opacity. The value 1.0 is opaque.

DrawSetStrokeWidth

DrawSetStrokeWidth() sets the width of the stroke used to draw object outlines.

The format of the DrawSetStrokeWidth method is:

void DrawSetStrokeWidth(DrawingWand *wand,
  const double stroke_width)

A description of each parameter follows:

wand

the drawing wand.

stroke_width

stroke width

DrawSetTextAlignment

DrawSetTextAlignment() specifies a text alignment to be applied when annotating with text.

The format of the DrawSetTextAlignment method is:

void DrawSetTextAlignment(DrawingWand *wand,const AlignType alignment)

A description of each parameter follows:

wand

the drawing wand.

alignment

text alignment. One of UndefinedAlign, LeftAlign, CenterAlign, or RightAlign.

DrawSetTextAntialias

DrawSetTextAntialias() controls whether text is antialiased. Text is antialiased by default.

The format of the DrawSetTextAntialias method is:

void DrawSetTextAntialias(DrawingWand *wand,
  const MagickBooleanType text_antialias)

A description of each parameter follows:

wand

the drawing wand.

text_antialias

antialias boolean. Set to false (0) to disable antialiasing.

DrawSetTextDecoration

DrawSetTextDecoration() specifies a decoration to be applied when annotating with text.

The format of the DrawSetTextDecoration method is:

void DrawSetTextDecoration(DrawingWand *wand,
  const DecorationType decoration)

A description of each parameter follows:

wand

the drawing wand.

decoration

text decoration. One of NoDecoration, UnderlineDecoration, OverlineDecoration, or LineThroughDecoration

DrawSetTextDirection

DrawSetTextDirection() specifies the direction to be used when annotating with text.

The format of the DrawSetTextDirection method is:

void DrawSetTextDirection(DrawingWand *wand,
  const DirectionType direction)

A description of each parameter follows:

wand

the drawing wand.

direction

text direction. One of RightToLeftDirection, LeftToRightDirection

DrawSetTextEncoding

DrawSetTextEncoding() specifies the code set to use for text annotations. The only character encoding which may be specified at this time is "UTF-8" for representing Unicode as a sequence of bytes. Specify an empty string to set text encoding to the system's default. Successful text annotation using Unicode may require fonts designed to support Unicode.

The format of the DrawSetTextEncoding method is:

void DrawSetTextEncoding(DrawingWand *wand,const char *encoding)

A description of each parameter follows:

wand

the drawing wand.

encoding

character string specifying text encoding

DrawSetTextKerning

DrawSetTextKerning() sets the spacing between characters in text.

The format of the DrawSetTextKerning method is:

void DrawSetTextKerning(DrawingWand *wand,const double kerning)

A description of each parameter follows:

wand

the drawing wand.

kerning

text kerning

DrawSetTextInterlineSpacing

DrawSetTextInterlineSpacing() sets the spacing between line in text.

The format of the DrawSetInterlineSpacing method is:

void DrawSetTextInterlineSpacing(DrawingWand *wand,
  const double interline_spacing)

A description of each parameter follows:

wand

the drawing wand.

interline_spacing

text line spacing

DrawSetTextInterwordSpacing

DrawSetTextInterwordSpacing() sets the spacing between words in text.

The format of the DrawSetInterwordSpacing method is:

void DrawSetTextInterwordSpacing(DrawingWand *wand,
  const double interword_spacing)

A description of each parameter follows:

wand

the drawing wand.

interword_spacing

text word spacing

DrawSetTextUnderColor

DrawSetTextUnderColor() specifies the color of a background rectangle to place under text annotations.

The format of the DrawSetTextUnderColor method is:

void DrawSetTextUnderColor(DrawingWand *wand,
  const PixelWand *under_wand)

A description of each parameter follows:

wand

the drawing wand.

under_wand

text under wand.

DrawSetVectorGraphics

DrawSetVectorGraphics() sets the vector graphics associated with the specified wand. Use this method with DrawGetVectorGraphics() as a method to persist the vector graphics state.

The format of the DrawSetVectorGraphics method is:

MagickBooleanType DrawSetVectorGraphics(DrawingWand *wand,
  const char *xml)

A description of each parameter follows:

wand

the drawing wand.

xml

the drawing wand XML.

DrawSkewX

DrawSkewX() skews the current coordinate system in the horizontal direction.

The format of the DrawSkewX method is:

void DrawSkewX(DrawingWand *wand,const double degrees)

A description of each parameter follows:

wand

the drawing wand.

degrees

number of degrees to skew the coordinates

DrawSkewY

DrawSkewY() skews the current coordinate system in the vertical direction.

The format of the DrawSkewY method is:

void DrawSkewY(DrawingWand *wand,const double degrees)

A description of each parameter follows:

wand

the drawing wand.

degrees

number of degrees to skew the coordinates

DrawTranslate

DrawTranslate() applies a translation to the current coordinate system which moves the coordinate system origin to the specified coordinate.

The format of the DrawTranslate method is:

void DrawTranslate(DrawingWand *wand,const double x,
  const double y)

A description of each parameter follows:

wand

the drawing wand.

x

new x ordinate for coordinate system origin

y

new y ordinate for coordinate system origin

DrawSetViewbox

DrawSetViewbox() sets the overall canvas size to be recorded with the drawing vector data. Usually this will be specified using the same size as the canvas image. When the vector data is saved to SVG or MVG formats, the viewbox is use to specify the size of the canvas image that a viewer will render the vector data on.

The format of the DrawSetViewbox method is:

void DrawSetViewbox(DrawingWand *wand,const double x1,const double y1,
  const double x2,const double y2)

A description of each parameter follows:

wand

the drawing wand.

x1

left x ordinate

y1

top y ordinate

x2

right x ordinate

y2

bottom y ordinate

IsDrawingWand

IsDrawingWand() returns MagickTrue if the wand is verified as a drawing wand.

The format of the IsDrawingWand method is:

MagickBooleanType IsDrawingWand(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

NewDrawingWand

NewDrawingWand() returns a drawing wand required for all other methods in the API.

The format of the NewDrawingWand method is:

DrawingWand *NewDrawingWand(void)

PeekDrawingWand

PeekDrawingWand() returns the current drawing wand.

The format of the PeekDrawingWand method is:

DrawInfo *PeekDrawingWand(const DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

PopDrawingWand

PopDrawingWand() destroys the current drawing wand and returns to the previously pushed drawing wand. Multiple drawing wands may exist. It is an error to attempt to pop more drawing wands than have been pushed, and it is proper form to pop all drawing wands which have been pushed.

The format of the PopDrawingWand method is:

MagickBooleanType PopDrawingWand(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.

PushDrawingWand

PushDrawingWand() clones the current drawing wand to create a new drawing wand. The original drawing wand(s) may be returned to by invoking PopDrawingWand(). The drawing wands are stored on a drawing wand stack. For every Pop there must have already been an equivalent Push.

The format of the PushDrawingWand method is:

MagickBooleanType PushDrawingWand(DrawingWand *wand)

A description of each parameter follows:

wand

the drawing wand.